Operating Instructions

How to Use Menu Functions
23
Menu Item Adjustments / Configurations (alternatives)
Sound
Mode
Selects the basic sound mode [Music] / [Speech] / [User]
[Music] :
Improves sound quality for watching music videos, etc.
[Speech] :
Improves sound quality for watching news, drama, etc.
[User] :
Adjusts the sounds manually by using the equaliser to suit your favourite sound
quality.
Bass I ncreases or decreases level to enhance or minimise lower, deeper sound output
Treble I ncreases or decreases level to enhanc
e or minimise sharper, higher sound output
Equaliser Adjusts the frequency level to suit your favourite sound quality
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume o
f the headphones
Surround
Surround sound settings [Off] / [V-Audio] / [V-Audio Surround]
[V-Audio] :
Provides a dynamic enhancer of width to simulate improved spatial effects
[V-Audio Surround] :
Provides a dynamic enhancer of width and depth to si
mulate improved spatial effects
Auto Gain Control
Adjusts the current volume level if it is extremely different from the previous viewed
channel or input mode [Off] / [On]
Volume Correction Adjusts the volume of indivi
dual channel or input mode
Speaker Distance to Wall Adjusts the low frequency sound [Over 30cm] / [Up to 30cm]
MPX
Selects multiplex sound mode (if available)
[Stereo] : Use this normally
[Mono] : When stereo signal cannot be received
[M1] / [M2] : Avail
able while mono signal is transmitted
Audio Preference
Selects the initial setting for audio tracks [Auto] / [Multichannel] / [Stereo] / [MPEG]
•
Selectable options vary depending on the country you select.
[Auto] : Automatically selects the audio tracks if programme has more than two tracks.
The priority is given in
the following order - Dolby Digital Plus, HE-AAC, Dolby
Digital, MPEG.
[Multichannel] : T he priority is given to multi-channel audio track.
[Stereo] : T he priority is given to stereo (2ch) audio track.
[MPEG] : T he priority is given to MPEG.
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : D olby Digital Plu
s, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
[PCM] : Digital output signal is fixed to PCM.
HDMI1 / 2 / 3 / 4 Input
Select to fit the input signal [Digital] / [Analogue]
[Digital] : HDMI cable connection
[Analogue] : HDMI-DVI
adaptor cable connection
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2 (ARC
function) terminals if the sound does not synchronize the image
Reset to Defaults
Press the OK button to reset the pr
esent Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings