Operating Instructions

On screen messages ●
FAQs, etc.
103
Message Meaning / Action
PIN incorrect! The PIN number you entered is wrong.●
Please check settings and connections
on HDMI devices.
Communication error in VIERA Link function (p. 87).●
Please enter a frequency between
10700 and 12750 MHz.
The frequency you entered is out of range. Consult the received satelite ●
broadcasting company. (p. 42).
Please wait. A function is in progress.●
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn ●
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition Completed.
Please switch off TV.
“Auto Setup” will automatically start when Mains power On / Off switch is ●
next turned On. (p. 12)
Sending Preset Data Q-Link or VIERA Link channel download is in progress.●
Software successfully updated.
Press EXIT to continue.
The software updating is finished.●
Software update failed. Please try again later.
Press EXIT to continue.
Perform “System Update Search Now” in System Update (p. 58).●
If this is still unsuccessful, there may not be any new software available.
The device is not directly connected to the TV.
The device may not work correctly.
Please do not connect the device via a USB HUB.●
This timer will not follow the TV Guide information.
Press OK to continue, RETURN to restore original timer.
If you edit the start time or end time of Guide link programming by more ●
than 10 minutes, it will no longer be performed as Guide link programming.
The programming will be performed according to the time setting.
Timer already expired ! The starting time in Timer Programming has already passed. Set the timer correctly (p. 53). ●
Timer Event Due to Start
∗∗∗
:
∗∗∗
has been
programmed for External
(USB HDD) recording at
∗∗
:
∗∗
This message will appear 2 mins. before timer programming event for ●
external (USB HDD) recording due to start.
Timer incorrect ! Set the start and end times in Timer Programming correctly (p. 53).●
Timer overlap.
Press OK to keep, RETURN to edit.
Timer programming events are overlapped. Press the OK button to keep the overlapped ●
setting. “Ext Rec.” and “USB HDD Rec.” are given priority over “Reminder”. When two or
more “Ext Rec.” / “USB HDD Rec.” overlap, the first timer programming event starts and
finishes as programmed. The next timer programming event can then start.
Tuner Locked
Press EXIT to unlock and stop recording
If you want to unlock the tuner, cancel Direct TV Recording (p. 86 and p. 88), ●
the recording of Timer Programming (p. 53) or One Touch Recording.
Unable to download, please check equipment The tape or disc is active. Stop the equipment and try again.●
Media Player■
Cannot read file
The file is damaged or unreadable.●
The TV does not support the format.(For the applicable formats and data ● p. 66)
No Device Inserted Confirm the SD Card or USB device is inserted correctly.●
No valid file to play The card has no data.●
Please confirm the Device is OK The inserted SD Card or USB device has a problem.●
This operation is not possible The selected operation is not available.●
Network■
An internal error occurred. Check the settings. (p. 56 and p. 57)●
Cannot read file
The file is broken or unreadable.●
Check applicable data format. (p. 54)
Communication with the server failed.
This might be a problem of the media server.●
Read the manual of the server software.
Connection to the server failed. Check the connections and settings. (p. 55 - 57)●
Server not found
There are no available media server on your home network.●
Check the connections and settings. (p. 55 - 57)
The software update is not completed.
Network download failed.●
Check the connections and settings. (p. 55 - 57)
Ethernet cable not connected
Check the connection of the LAN cable. If you use a hub, also check the light on the hub is lit. ●
The LAN cable might be defective.●