Operating Instructions
Watching External inputs ●
Basic
29
Screen display
Terminal
AV1 AV2 AV3
COMPONENT PC
HDMI1 HDMI2 HDMI3 HDMI4
Manual input
(
default setting
in “Input Labels”
)
AV1
AV1-RGB
AV2
AV2-S-Video
AV2-RGB
AV3 COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4
Auto input
(
EC mode or
VIERA Link
)
EC/AV1
EC/AV1-RGB
EC/AV2
EC/AV2-S-Video
EC/AV2-RGB
―――
EC/HDMI1
Applicable for
●
EC mode and
VIERA Link
EC/HDMI2
Applicable ●
for
VIERA Link
EC/HDMI3
Applicable ●
for
VIERA Link
EC/HDMI4
Applicable ●
for
VIERA Link
If the above information is permanently displayed on the top left of the screen, press the ● button to clear.
Operating the equipment with the TV remote control
The Panasonic equipment connected to the TV can be directly operated with the below buttons of
this TV remote control.
DVD/VCR
TV
Selection Switch for operating the connected equipment
Select “DVD/VCR” to operate Panasonic DVD Recorder, DVD Player, Player
theatre, Blu-ray Disc theatre or VCR
“How to change the code for the type of the equipment” (see below)
Select “TV” to use USB HDD Recording, Media Player or VIERA Link
“USB HDD Recording” (p. 64)
“Media Player” (p. 70)
“VIERA Link Control” (p. 90)
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD / video content
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD / video content: Skip to the previous track or title
(not available for the operation of USB HDD Recording)
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD / video content: Skip to the next track or title
(not available for the operation of USB HDD Recording)
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
PROGRAMME
Channel Up / Down
Select channel
REC
Record
Start recording
How to change the code for the type of the equipment
■
Each type of the Panasonic equipment has its own remote control code.
Please change the code according to the equipment you want to operate.
Set the position to “DVD/VCR”
DVD/VCR
TV
Press and hold during the following operations
Enter the appropriate code,
see table below
abc def
jkl
ghi
mno
tuvpqrs
wxyz
Press
Type of the equipment Code
DVD Recorder, DVD Player 70 (default)
Player theatre, Blu-ray Disc theatre 71
VCR 72
Note
Confirm if the remote control works correctly after changing the code.●
The codes may be reset to default values if batteries are replaced.●
Some operations may not be possible on some equipment models.●