Operating Instructions

How to Use Menu Functions
33
Menu Item Adjustments / Configurations (alternatives)
Picture
Advanced Settings
DVI Input Setting
C hanges the black level in the image for HDMI input mode with DVI input signal
manually [Normal] / [Full]
•
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select [Full].
•
T he black level for HDMI input signal will be adjusted automatically.
•
F or HDMI input mode with DVI input signal only
Pixel Orbiter
Selects the mode for wobbling of the image to prevent panel “image retention”
[Auto] / [On]
[Auto] :
Automatically works only for the appropriate images
and you rarely recognise the
wobbling.
Scrolling Bar
Scrolls the vertical bar to prevent panel “image retention”
•
Press the OK button to start scrolling and press any buttons (except Standby) to exit
this mode.
Reset to Defaults
Press the OK button to reset the present Picture Viewing Mode of the selected input to
the default settings
Sound
Mode
Selects the basic sound mode [Music] / [Speech] / [User]
•
T he selected mode affects all input signals.
[Music] :
Improves sound quality for watching music videos, etc.
[Speech] :
Improves sound quality for watching news, drama, etc.
•
I n Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User] :
Adjusts the sounds manually by using the equaliser to suit your favourite sound
quality.
•
F or the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and
[Treble]. Select the [Equaliser] and adjust the frequency. [Equaliser] (see below)
Bass I ncreases or decreases level to enhance or minimise lower, deeper sound output
Treble I ncreases or decreases level to enhance or minimise sharper, higher sound output
Equaliser
Adjusts the frequency level to suit your favourite sound quality
•
T his function is available when [Mode] is set to [User].
•
Select the frequency and change the frequency level by using the cursor button.
•
If you want to enhance the bass sound, raise the level of the lower frequency. If you
want to enhance the treble sound, raise the level of the higher frequency.
•
T o reset the levels of each frequency to the default settings, select the [Reset to
Defaults] by using the cursor button, and then press the OK button.
Balance Adjusts volume level of right and l
eft speakers
Headphone Volume Adjusts the volume of the headphones
Surround
Surround sound settings [Off] / [V-Audio] / [V-Audio Surround]
[V-Audio] :
Provides a dynamic enhancer of width to simulate improved spatial effects
[V-Audio Surround] :
Provides a dyna
mic enhancer of width and depth to simulate improved spatial effects
Auto Gain Control
Adjusts the current volume level if it is extremely different from the previous viewed
channel or input mod
e [Off] / [On]
Volume Correction Adjusts the volume of individual channel or input mode