Operating Instructions

Using TV Guide
24
Timer Programming (DVB mode)
T imer Programming is a timer to remind watching or record the programme to the external recorder or the USB HDD.
1 Select the forthcoming programme 2 Select the function ([Ext Rec.],[USB HDD Rec.] or [Reminder])
select
set
09
1/1
500GB (50%)
-- - --/-- --:--
20:00D 12 BBC ONE
--:--
20:30
---
-- - --/-- --:-- --:-----
-- - --/-- --:-- --:-----
-- - --/-- --:-- --:-----
Timer Programming
Function No. Channel Name Date Start End
Wed 27.10.2010 10:46
I nfo
EXIT
Select timer
RETURN
D elete
Edit timer
P age up
P age down
Ext Rec.
Wed 27.10.2010
(30
min.)
(--- min.)
(--- min.)
(--- min.)
(--- min.)
<TIMER>
(Timer Programming screen)
store
select
LED will turn to orange if
Timer Programming is set.
(Orange LED will flash if the recording of
Timer Programming is in progress.)
LED
[Ext Rec.] / [USB HDD Rec.] :
to record the programme to the external recorder or the USB HDD
When the start time comes, the channel will be switched automatically and the
video and audio signals will be output. 2 minute
s before the starting time, a
reminder message appears if you are wat ching TV.
[Reminder] :
to remind you to watch the programme
When you are watching TV, a reminder message appears 2 minute
s before the
start time. Press the OK button to switch to the programmed channel.
■ To check / change / cancel a timer
programming event
■ To return to TV Guide
BACK/
RETURN
“Timer Programming” (p.55 - 57)
■ If you select the current programme
A confirmation screen asking whether you wish to watch or record the programme will appear.
Select [Timer Programming] and set [Ext Rec.] or [USB HDD Rec.] to record from the time you finish the timer programming
event setting.
Das Erste
19:30- 20:00
V iew T imer P
rogramming
access
select
Note
•
T his function is not available in Analogue mode.
•
T imer Programming only works reliably if correct time information is received via the signal from the broadcaster or service
provider.
•
N o other channel can be selected while the recording of Timer Programming is in progress.
•
When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the
TV.
If a compatible recorder with Q-Link, VIERALink or similar technologies is connected to the TV (p.97, 98) and the [Link
Settings] (p.40) are completed, no setting of the recorder is required. Also read the manual of the recorder.
•
When recording programmes to the USB HDD, be sure to format the USB HDD and enable it for recording in [Recording
Setup] (p.67).