Model No. TX-P42ST31B TX-P50ST31B Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only.
Features 3D technology Viewing 3D images on the Full HD panel You can enjoy viewing 3D images on this TV by wearing the 3D Eyewear. RealD 3D This TV and 3D Eyewear use the 3D technology of RealD. RealD is one of the inventors in 3D technology. DVB-T tuner built-in Receives DVB (Digital Video Broadcasting) digital terrestrial broadcasts. DVB-T2 tuner built-in DVB-T2 is an advanced digital terrestrial system for more efficient transmission.
Do not display a still picture for a long time This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty. Typical still images • Channel number and other logos • Image displayed in 4:3 mode • Video game • Computer image To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p.
Safety Precautions Warning Safety Precautions ■ Mains plug and lead To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: • This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. • Insert the mains plug fully into the socket outlet. • Ensure that the mains plug is easily accessible. • Remove the mains plug when cleaning the TV. If you detect anything unusual, • Do not touch the mains plug with a wet hand.
Warning ■ Take care To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: • Do not remove covers and never modify the TV yourself as live parts are Safety Precautions accessible when they are removed. There are no user serviceable parts inside. • Do not expose the TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.
Accessories / Options Standard accessories Remote Control • N2QAYB000572 Quick Start Guide Accessories / Options Ferrite core (2) (Large size) • J0KG00000014 (p. 12, 85) Batteries for the Remote Control (2) • R6 (p. 7) Ferrite core (Small size) • J0KG00000011 (p. 86) Pedestal TX-P42ST31B : TX-P50ST31B : • TBL5ZX0065 • TBL5ZX0069 • TXFBL5Z0007 • TXFBL5Z0009 • TXFBL5Z0017 • TXFBL5Z0019 (p.
Wall-hanging bracket The angle of wall-hanging bracket can be adjusted in “zero tilting (vertical)” and • TY-WK4P1RW “15-degree tilting” for this TV. Rear of the TV 400 mm 300 mm of personal injury and product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Any damage caused by installing without a qualified installer will void your warranty.
A Assembly screw (4) C (silver) • XYN5+F20FN E Base Assembly screw (black) • XSB4+8FNK • TBL5ZX0065 (TX-P42ST31B) • TBL5ZX0069 (TX-P50ST31B) M4 × 8 M5 × 20 D Pole B Assembly screw (4) Quick Start Guide • TBL5ZA3055 (TX-P42ST31B) • TBL5ZA3065 (black) • THEL087N (TX-P42ST31B) • THEL088N (TX-P50ST31B) F Cover • TBL5ZB3045-1 (TX-P42ST31B) • TBL5ZB3054-1 (TX-P50ST31B) (TX-P50ST31B) Accessories / Options M5 × 25 1 Assembling the pedestal Use the assembly screws A to fasten the pole D to the ba
Identifying Controls Remote Control DIRECT TV REC EXIT VIERA Lin k TO VIERA OLS BACK/ RETURN OPTION 19 20 21 22 10 11 12 TEXT STTL INDEX HOLD abc def ghi jkl mno pqrs tuv wxyz 23 24 25 13 LAST VIEW 26 14 REC PROGRAMME 27 DVD/VCR TV TV 1 Standby On / Off switch • Switches TV On or Off standby 2 3D button (p. 32) • Switches to the viewing mode between 2D and 3D 3 [Main Menu] (p. 35) • Press to access Picture, Sound, Timer and Setup Menus 4 Aspect (p.
TV 7 1 8 9 Quick Start Guide 2 14 3 4 5 10 Identifying Controls 6 1 2 3 4 5 6 11 12 13 CI slot (p. 57) SD Card slot (p. 59) USB 2 port (p. 59) HDMI4 terminal (p. 86) Headphones jack (p. 86) AV2 terminals (p. 86) 7 Function select / • [Volume] / [Contrast] / [Brightness] / [Colour] [Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ / [Balance] / [Auto Setup] (p.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. There are some restrictions on placement for viewing 3D images. For details (p.
Example 3 Connecting DVD Recorder / VCR and Satellite receiver TV, DVD Recorder / VCR and Satellite RF cable Rear of the TV Terrestrial aerial Quick Start Guide Fully wired HDMI compliant cable AC 220-240 V 50 / 60 Hz Fully wired SCART cable Fully wired HDMI compliant cable Basic Connection Fully wired SCART cable Aerial input terminal Mains lead HDMI Recorder/ AV AV 2 AV 1 HDMI DVD Recorder or VCR RF OUT Satellite receiver RF OUT RF cable RF IN RF IN RF cable ■ Connecting to the network
Auto Setup Search and store TV channels automatically. • These steps are not necessary if the setup has been completed by your local dealer. • Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the appropriate manual. Plug the TV into mains socket and switch On 2 Select your country • Takes a few seconds to be displayed.
4 Setup the network connection Quick Start Guide Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 75). • To setup the wireless connection, the Wireless LAN Adaptor (optional accessory) is required. Please note that this TV does not support wireless public access points. • Ensure the network connections (p. 12) and network environment are completed before starting setup. Select the network type Network Setup [Wired] “Wired connection” (p.
4 4. Select [Yes] Access Point Settings Encryption key is set to:XXXXXXXX Select 'Yes' to confirm. Select 'No' to change. Yes No select set • To re-enter the encryption key, select [No]. • If the connection has failed, check the encryption key, settings and positions of your access point. And then, follow the on screen instructions. Connection Test Check access point connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection.
5 ■ How to input Owner ID 1 Enter the PIN number (4 digits) Owner ID abc Please enter new PIN PIN * * * * • Enter the PIN number twice at first setting.
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. • This TV has no full browser function and all features of websites may not be available. 1 Turn power on • Press for about 1 second • Mains power On / Off switch should be On. (p.
Watching TV 1 Turn power on • Press for about 1 second • Mains power On / Off switch should be On. (p. 10) ■ VIERA Connect introduction banner appears You can access to VIERA Connect and enjoy the various contents. (p. 17) • To remove this banner, leave for about 5 seconds or press any buttons (except the buttons to access VIERA Connect). • To set this banner display off [VIERA Connect Banner] (p.
Other useful functions Display Information banner Display Information banner • Also appears when changing a channel 1 Example : DVB HDTV 1 ZDF Mute Bad signal 2 3 5 6 Coronation Street 20:00 - 20:55 Now Info AD ) 4 20:35 All DVB Channels Select favourites STTL TEXTMulti Audio 45 5 Programme Start / Finish time (DVB) Channel number, etc. (Analogue) 6 Progress time indicator of the selected programme (DVB) 7 [All DVB Channels] or [Favourites1-4] (p.
Hold Freeze / unfreeze picture HOLD Display the selectable settings for the current status Check or change the current status instantly OPTION • To change select / change select access Watching TV [Audio Description] (DVB mode) Set to [Auto] if the programme has Audio Description service, then you will hear an additional audio track to describe events on screen • To adjust the volume for Audio Description [Audio Description Menu] (p.
Aspect Change the aspect ratio (image size) ASPECT Enjoy viewing the image at its optimum size and aspect. Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 87).
Using TV Guide TV Guide−Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). • This TV supports the GUIDE Plus+ system. • The Rovi branding partner will supply the rating information in the programme information and the recommended group in the Search list. • DVB and Analogue channels are displayed on the same TV Guide screen.
■ To search programme types and view a channel list of the searched programmes (DVB mode) (yellow) (Search list) Prog.Type All Types Search Titles... All Types Movie Movie News News and Factual select type (Type list) Search view ■ To search programme titles and view a list of the searched programmes (DVB mode) (yellow) (Search list) 1 Select 2 Set characters 3 Start [Search Titles...] (maximum: 19 characters) [Search] (green) select select Search Search Titles...
Note • This function is not available in Analogue mode. • Timer Programming reminder messages will remain displayed until one of the following occurs: • You press the OK button to view the programme or the EXIT button to cancel the reminder. • The timer programming event that the reminder is set for ends. • No other channel can be selected while the recording of Timer Programming is in progress. • When recording programmes, be sure to make the proper settings on the recorder connected to the TV. (p.
Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) • The availability of teletext services for a programme is indicated by [TEXT] in the information banner. Information banner 1 BBC ONE WALES 20:35 All DVB Channels Select favourites Coronation Street 20:00 - 20:55 Now (p. 19) Displayed if programme has teletext service TEXT Depending on the broadcaster, the digital teletext (MHEG) services may not be available.
Analogue teletext Analogue teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
INDEX Subtitles Return to the main index page View a favourite page stored STTL • Factory setting is “P888” (subtitle service) on the blue button (List mode). INDEX View in multi window Watch TV and Teletext in two windows at once TEXT • Operations can be made only in Teletext screen. TV and Teletext • Each time pressed: Teletext TV Store frequently viewed pages press and hold (Corresponding coloured button) • If you wish to use Subtitles, do not change number on blue button.
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input. • To connect the equipment (p.11, 12, 84 - 86) The Remote Control is capable of operating some functions of selected external equipment. “Operating the equipment with the TV remote control” (p. 29) 1 Turn the TV on When connecting with SCART as example 2 or 3 (p.
Operating the equipment with the TV remote control Watching External Inputs The equipment connected to the TV can be directly operated with the below buttons of this TV remote control. Selection Switch for operating the connected equipment Select “DVD/VCR” to operate Panasonic DVD Recorder, DVD Player, Player theatre, Blu-ray Disc theatre or VCR DVD/VCR TV “How to change the code for the type of the equipment” (see below) Select “TV” to use Media Player or VIERA Link “Media Player” (p.
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. “Optional accessories” (p. 6) This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats.
■ 3D photos and 3D videos taken by 3D-compatible Panasonic products • Available in Media Player (p. 59) ■ 2D images converted to 3D Set to [2D 3D] mode in [3D Mode Selection] (p. 32) 1 Turn the 3D Eyewear on 2 Put on the 3D Eyewear 3 Watch the 3D images • Safety precautions will be displayed when you 4 Example : Safety Precautions To enjoy 3D images safely and comfortably, please read the Operating Instructions fully.
Changing 2D - 3D mode You can easily change the viewing mode between 2D and 3D using the 3D button. Select the mode 3D Mode Selection select • Items of [3D Mode Selection] 2D 3D vary depending on the condition. 3D set 2D [3D] / [2D] / [2D 3D] : Displays the appropriate image that you desire without selecting 3D format • This mode may not work properly depending on the source image format. In this case, select the appropriate 3D format manually.
3D Settings If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings.
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. • For [VIERA Link Control] function to operate correctly, ensure the connections and settings are completed. “Summary of Q-Link and VIERA Link features” (p. 76, 77), “Preparations” (p. 79) After connection, turn the equipment on and then switch the TV on.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu 1 • Displays the functions that can be set (varies according to the MENU input signal) Select the menu 2 select Main Menu access Picture Sound Timer Setup select Example : [Picture Menu] access 1/2 Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Vivid Colour C.A.T.S.
Menu list Menu Picture How to Use Menu Functions 36 Item Adjustments / Configurations (alternatives) Viewing Mode Basic picture mode [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] / [Photo] In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [C.A.T.S.], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. • Set for each input signal.
Menu Item Intelligent Frame Creation 24p Smooth Film Clear Cinema 3D Refresh Rate Side Panel 16:9 Overscan DVI Input Setting Pixel Orbiter Scrolling Bar Reset to Defaults Sound Mode Bass Treble How to Use Menu Functions Picture Advanced Settings Resolution Enhancer Adjustments / Configurations (alternatives) Automatically compensates the picture frame rate and removes juddering movements to make the images smooth [Off] / [Mid] / [Max] • Depending on the contents, images may be noisy.
Menu Item Equaliser Balance Headphone Volume Surround Auto Gain Control Volume Correction Preferred Multi Audio NICAM Sound How to Use Menu Functions Speaker Distance to Wall SPDIF Selection HDMI1 / 2 / 3 / 4 Input Audio Description Menu 38 Audio Description Adjustments / Configurations (alternatives) Adjusts the frequency level to suit your favourite sound quality • This function is available when [Mode] is set to [User].
Menu Item Adjustments / Configurations (alternatives) Sets programme reminders and records forthcoming programmes (p. 51) Off Timer Sets the time until the TV automatically goes to Standby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 20) Auto Standby Sets the duration of time that the TV will remain On when no operation is received from the user [Off] / [2] / [4] (hours) • Starting Timer Programming automatically does not affect this function.
Menu Item Favourites Edit Creates a list of favourite DVB channels (p. 48) Channel List Skips the unwanted DVB channels or edits DVB channels (p. 49) Auto Setup Automatically searches for the DVB channels received in the area (p. 46) DVB Tuning Menu Channel Sorting by Region Automatically sorts tuned channels according to the available region (p. 47) Analogue Tuning Menu Setup How to Use Menu Functions Manual Tuning Searches for the DVB channels manually (p.
Menu Sets the VIERA Connect introduction banner display [Off] / [On] (p. 17, 18) Playing Time Display Set to [On] to display a continuous record of time spent using Game mode every 30 minutes [Off] / [On] • This function is available when [Game] is selected in [Viewing Mode] (p. 36) Radio Mode Sets the timer for turning off the screen automatically when a radio channel is selected [Off] / [5] / [10] / [15] / [20] (seconds) • The sound is active even if the screen turns off.
Overview (Picture, Sound, Timer, Setup) How to operate (p. 35) 1/2 Main Menu Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Vivid Colour Reversal Film Effect Picture Sound Timer Dynamic Warm Off Off Setup 2/2 C.A.T.S. P-NR 3D-COMB 3D Settings Screen Display Advanced Settings Reset to Defaults 1/2 Advanced Settings (p.
TV Guide Settings Menu Main Menu Normal TV Guide View GUIDE Plus+ Postcode Access GUIDE Plus+ Information Access Picture (p. 39) Sound Enter Postcode Postcode Timer A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 0 5 6 7 TV Guide Settings Eco Navigation Link Settings Child Lock DVB Tuning Menu Analogue Tuning Menu Display Settings Network Setup DivX® VOD 8 9 1 1/2 Setup .
Overview (Setup) How to operate (p.
DVB Favourites Editor All DVB Channels 70 72 105 719 720 1 7 DVB Manual Tuning [CH21] Frequency Signal Quality Signal Strength No. 474,00 MHz 0 0 Channel Name 10 10 New Type 1 7 14 70 72 105 719 720 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru BBC ONE Wales BBC THREE All DVB Channels BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Favourites1 (p. 48) (p. 49) Free TV: 0 Pay TV: 0 Radio: 0 Stopped Data: 0 (p.
Retuning from Setup Menu Automatically retune the channels received in the area. • This function is available if channel tuning is already performed. • Only the selected mode is retuned. All the previous tuning settings are erased. • If Child Lock PIN number (p. 53) has been set, the PIN number is required. • If tuning has not been done completely [Manual Tuning] (p. 47, 50) DVB or Analogue channels 1 Select DVB or Analogue (p.
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. 1 Select DVB (p. 18) TV 2 3 Display the menu MENU Select [Setup] select Main Menu access Picture Sound Timer Setup 4 Select [DVB Tuning Menu] select DVB Tuning Menu Access access 5 Select one of the following functions select DVB Tuning Menu EXIT Access Access Access Access Access Access On Access access / store • [Auto Setup] “Retuning from Setup Menu” (p.
List favourite DVB channels [Favourites Edit] Create your favourite channel lists from various broadcasters (up to 4: [Favourites]1 to 4). The DVB Favourites lists are available for switching in the Information banner (p. 19) and from [Category] in the TV Guide screen (p. 22).
Skip unwanted DVB channels, Edit DVB Channels [Channel List] You can hide unwanted DVB channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Skip unwanted Analogue channels, Edit Analogue channels [Channel List] You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and [reveal] / [hide] 1 2 3 4 5 6 7 • To reveal all channels select Analogue Channel List BBC1 ***** ***** ***** ***** ***** ***** (yellow) [reveal] / [hide] : [reveal] : [hide] (skip) ■ To edit channels You can also edit each channel in Channel List.
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel automatically to record even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 23). • Timer Programming can store up to 15 events. • For recording using Timer Programming, the TV must be either On or in standby.
Set timer programming event details [Timer Programming] 1 Start making the settings 2 Select the function select ([Ext Rec.] or [Reminder]) [Reminder] : [Ext Rec.] : to remind you to watch the programme to record the programme to the external recorder When you are watching TV, a reminder message When the start time comes, the channel will be switched automatically and the video and audio signals will be output. appears 2 minutes before the start time.
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it.
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminals that are not connected to any equipment. • To select the input mode (p.
Shipping Condition Resets the TV to its original condition with no channels tuned in. All settings other than [Owner ID] are reset (channels, picture, sound settings, etc.). • To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p.
Owner ID Entry of the PIN number and personal information (your name, address and postcode). In the unfortunate event of theft, the Owner ID will help the Police to determine the owner.
Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This TV works only for Pay TV modules complying with CI standard. • This function is not available for BskyB’s Sky channels. • Video and audio signals may not be output depending on broadcasts or services. CI slot Caution Insert or remove Turn Off Mains power On / Off switch whenever inserting or • straightly and removing the CI module.
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. • To download • If you choose not to download EXIT You can update any new software automatically or manually.
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. Photo mode : Still pictures recorded by digital cameras will be displayed. Video mode : Moving pictures recorded by digital video cameras will be played back. Music mode : Digital music data will be played back.
Starting Media Player 1 Insert the SD Card or USB Flash Memory to the TV 2 Start Media Player (p. 59) Media Player Signal output from all AV terminals will be disabled during Media Player view. • Also possible by pressing following Press OK to proceed. buttons. Press EXIT to return to TV viewing. AV 3 Media Player select access If two or more devices are not • connected, this step will be skipped. Drive Select EXIT Select RETURN Access SD Card USB Drive... USB Flash...
■ To sort by folder, recorded date or recorded month 1 Display the view selection (green) 2 Select the sort type Folder view Sort by Date Sort by Month select access [Folder view] : Displays the thumbnail grouped by folder • The files which are not into a folder will be collected to the folder named “/”. [Sort by Date] : Displays the thumbnail grouped by the same date • The group of the photos without recorded date is shown as [Unknown].
Multi Shot 3D This TV can create the 3D photo using a pair of photos in the SD Card and save it into the same SD Card. • This TV can also create the 3D photo from photos in the USB Flash Memory, but cannot save it. • This function is available with photos recorded by digital cameras. • Depending on the photos you select, the created 3D photo may not be suitable or the 3D photo creation may not be possible.
Photo Settings Setup the settings for Photo mode. 1 Display the option menu OPTION 2 Select [Slideshow Settings] 3 Select the items and set Option Menu Slideshow Settings Slideshow Settings Frame Colour Effect Transition Effect Aspect Burst Playback Interval Repeat Back Ground Music access Off Off Fade Original Off 5 seconds On select access / store Note • Picture quality may become lower depending on the slideshow settings. • Picture setting may not work depending on the slideshow settings.
Menu Item Adjustments / Configurations (alternatives) Slideshow Settings Selects the back ground music during Photo mode [Off] / [Type1] / [Type2] / [Type3] / [User] / [Auto] • [Type1], [Type2] and [Type3] are the fixed music each installed in this TV. [User] : Music data in the device registered by yourself will be played back. To register the music 1. Select the music file 2.
Video mode • Supported file format (p. 88) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example : Thumbnail - [Title view] Title view The preview will start when the title is Media Player Video highlighted if it supports a preview. • To turn off the preview “Video Setup” (p.
■ How to operate in the playback Example : Playback SD 19/02/2010 11:21 • To display / hide the operation guide and information 00:15:39 00:02:05 banner playback • To operate the Rewind EXIT Pause / Playback Fast forward Stop RETURN Operation guide Information banner • To the next title / scene change aspect • To ASPECT • To the previous title / scene return to thumbnail • ToBACK/ (green) (red) RETURN ■ To change the device “Change the device” (p.
Audio output Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal. • To confirm or change the current sound status “Confirm or change the current status” (p.
■ Playback from File view Selected file will be played back. 1 Select the folder select access 2 Select the file Example : Thumbnail - File view Media Player My Song_2 My Song_3 My Song_8 My Song_9 My Song_10 My Song_11 EXIT RETURN My Song_4 OPTION My Song_5 Info Option Menu Drive Select My Song_6 My Song_7 SD Card Contents Select • To display the information of the highlighted file select Title Album Artist Track No.
Using Network Services VIERA Connect VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. • This TV has no full browser function and all features of websites may not be available. Network Link Enables to control the TV from the network equipment (Smartphone, etc.
Network Setup • Ensure the connections are completed before starting Network Setup. “Network connections” (p. 69) 1 2 Display the menu MENU Select [Setup] select Main Menu access Picture Sound Timer Setup 3 Select [Network Setup] select Network Setup access Access ■ To return to TV EXIT Using Network Services Network Link settings Settings which allow the TV to be controlled by the equipment connected to the network.
Wired connection settings This setting is for the network connection by using the LAN cable.
4 Select [Connection Test] and access to test select Network Setup Connection Test Network Type Access Point Settings IP/DNS Settings Network Link Settings Software Update MAC Address Access Wired access • Performs automatic testing of the network connection for the TV. (It takes a while to test.) ab-cd-ef-gh-ij-kl Connection Test : succeeded The test is successful and the TV is connected to the network. Check network cable connection. Check acquired IP address.
■ [WPS(Push button)] press the WPS button on the access point until the light flashes WPS(Push button) 1) Please press the ‘WPS’ button on the access point until its light flashes. 2) When the light is flashing select ‘Connect’ on TV. If you are unsure, please check the instruction manual of the access point. Connect connect the Wireless LAN Adaptor and the access point • Ensure that your access point supports WPS for this setup.
2 Access the encryption key input mode Encryption Key Setting Connection will be made with the following settings:SSID : Access Point A Authentication type : WPA-PSK Encryption type : TKIP • If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point. Please input the encryption key.
VIERA Connect You can access VIERA Connect and enjoy various network contents. • VIERA Connect requires a broadband internet connection. Dial-up internet connections cannot be used. • Ensure the network connections and network settings are completed. “Network connections” (p. 69), [Network Setup] (p. 70 - 74) • For details about VIERA Connect operation “Using “VIERA Connect”” (p. 17) • Setup menu (Items in [Setup] may change without notice.
Link Functions (Q-Link / VIERA Link) Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 78) VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and enables easy control, convenient recording, playback, energy saving, creation of a home theatre, etc., without complicated setting. (p. 79 - 83) You can use Q-Link and VIERA Link functions together. • This TV supports “HDAVI Control 5” function.
VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Features VIERA Link function Analogue channel download – ∗5 Easy playback Power on link Power off link Reduce unnecessary power – consumption in standby ∗3 ∗6 Auto standby for unnecessary equipment Pause Live TV programme – Direct TV Recording – Control the menu of the connected ∗1 equipment by VIERA remote control Speaker control Amplifier with VIERA Link function – – – ∗3 – ∗3 ∗6 ∗3 – – – – ∗1 – • To use Player th
Q-Link Preparations • Connect the DVD Recorder / VCR with the following logos : “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)” or “SMARTLINK (a trademark of Sony Corporation)” • Q-Link connection (p. 76) • Use fully wired SCART cable. • Set up the DVD Recorder / VCR. Read the manual of the recorder. • Q-Link terminal setup in the Setup Menu [AV1 out] (p.
VIERA Link “ Control™”∗ ∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 76, 77). These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
Reduce unnecessary power consumption in standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 39) The power consumption in Standby mode of the connected equipment is controlled in synchronization with the TV On / Off state. When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption in Standby mode of the connected equipment is automatically minimised.
Pause Live TV programme [Pause Live TV] You can pause the live TV programme and resume the programme later. The live TV programme will be recorded on HDD of the connected DIGA Recorder. • This function is available with a DIGA Recorder which has HDD. • If you connect a variety of recorders including other manufacturers’ recorders at the same time, please connect the DIGA Recorder which has HDD to the TV’s lower HDMI terminal number.
3 Select the equipment you want to access The type of the connected equipment is displayed. Select the type of the equipment and access. VIERA Link Menu select Pause Live TV Direct TV Rec VIERA Link Control Speaker Selection Start Start Recorder Home Cinema store [Recorder] / [Player] / [Home Cinema] / [Video Camera] / [LUMIX] / [Digital Camera] / [Other] • You can also access directly by using VIERA TOOLS “How to Use VIERA TOOLS” (p.
Speaker control [Speaker Selection] You can control the home theatre speakers with this TV remote control (point the remote control at the TV’s signal receiver). • If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 76, 77), “Preparations” (p.
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table (p. 86), and the specifications (p. 102, 103).
Network (wired) Less than 10 cm LAN cable Less than 10 cm Internet Modem Hub or Router Ferrite core - Large size (supplied) Installing the Ferrite core Pull back the tabs Wind the cable (in two places) twice Press the cable through and close USB devices Wireless LAN Adaptor Side panel of the TV Camcorder / Game equipment Rear of the TV (Viewing) (Listening) Game equipment To listen with speakers Optical digital audio cable External Equipment Camcorder or Amplifier with speaker system RCA
Headphones Rear of the TV Less than 10 cm Side panel of the TV (M3 stereo mini plug) Ferrite core - Small size (supplied) (TX-P42ST31B) Installing the Ferrite core Open Pull back the tab Wind the cable twice Press the cable through and close • To adjust volume [Headphone Volume] (p.
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 21) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio. This function will work in any aspect mode.
Supported file format in Media Player ■ Photo Format JPEG File extension Image resolution (pixel) 8×8 to 30,719 × 17,279 .jpg .mpo Details / Restrictions DCF∗1 and EXIF∗2 standards Sub-sampling : 4:4:4, 4:2:2, 4:2:0 • Progressive JPEG is not supported.
■ Music Codec MP3 File extension .mp3 AAC .m4a WMA .wma Restrictions – • Copy-protected files cannot be played back. • Copy-protected files cannot be played back. • WMA Pro and WMA Lossless are not supported. Note • Some files may not be played back even if they fulfill these conditions. • Do not use two-byte characters or other special codes for data. • The device may become unusable with this TV if the file or folder names are changed. DivX DivX Certified® to play DivX® and DivX Plus™ HD (H.
Devices for recording or playing back ■ SD Card (for playing back in Media Player) Card format : SDXC Card - exFAT SDHC Card / SD Card - FAT16 or FAT32 Compliant card type (maximum capacity) : SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring miniSD adaptor) • If miniSD Card is used, insert / remove it together with the adaptor. • Check the latest information on the card type at the following website. http://panasonic.
Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you reach User input Name the desired character. abc A U a u B V b v C W c w D X d x E Y e y F G H I Z 0 1 f g h i z ( ) + J 2 j - K 3 k . L 4 l * M N O P Q R S T 5 6 7 8 9 ! : # m n o p q r s t _ 1 .
USB connection • It is recommended to connect the USB Flash Memory directly to the TV’s USB ports. • Some USB devices or USB HUB may not be used with this TV. • You cannot connect any devices by using USB card reader. • You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory. • Additional information for USB devices may be on the following website. http://panasonic.jp/support/global/cs/tv/ USB Keyboard • The USB Keyboard which requires the driver is not supported.
Input signal that can be displayed COMPONENT (Y, PB, PR), HDMI Signal name 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p COMPONENT HDMI Mark : Applicable input signal PC (from HDMI terminal) Signal name 640 × 480 @60 Hz 750 (720) / 60p 1,125 (1,080) / 60p Horizontal frequency (kHz) 31.47 45.00 67.50 Vertical frequency (Hz) 60.00 60.00 60.00 Applicable input signal for PC is basically compatible to HDMI standard timing.
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre for assistance. For details (p. 104) Block noise, frozen or disappearing image occurs in digital mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned • Check the position, direction and connection of the aerial. • Check [Signal Condition] (p. 48).
Problem Chaotic image, noisy Screen No image can be displayed Blurry or distorted image (no sound or low volume) Unusual image is displayed No sound is produced Sound Sound level is low or sound is distorted Unusual sound from the TV Cannot see 3D images 3D 3D Eyewear is turned off automatically There is something wrong with the 3D images The indicator lamp does not light when pressing the power button on the 3D Eyewear Cannot find a channel you have previously watched Sound is unusual (fluorescent l
Problem Actions • Check the LAN cable is connected properly. (p. 69) • Check the connections and settings. (p. 69 - 74) • Check the network equipment and network environment. • The router may not be set to issue IP address automatically. If the Network Cannot connect to the network Cannot operate VIERA Connect The TV does not switch On network administrator prefers to allocate an IP address, set an IP address manually. (p. 71) • The router may be using MAC address filtering (security setting).
Message Meaning / Action • It is not possible to record from COMPONENT or HDMI. Connect Feature not available. Feature not available. Press OK to view how it works. Found new software version ∗∗∗. Press OK to start update (may take over 40 mins) or press EXIT to ignore and you can update when TV is in standby Invalid operation - Please check settings and connections. Invalid system time. Please exit ! Invalid system time, Timer Programming will not work.
Message Meaning / Action Reset to Factory Shipping Condition Completed. Please switch off TV. • [Auto Setup] will automatically start when Mains power On / Off Sending Preset Data • Q-Link or VIERA Link channel download is in progress. Software successfully updated. Press EXIT to continue. • The software updating is finished. Software update failed. Please try again later. Press EXIT to continue. • Perform [System Update Search Now] in System Update (p. 58).
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wring the cloth and wipe the surface. Finally, wipe away all the moisture. Caution • Do not use a hard cloth or rub the surface too hard.
Index Index A Accessories ······················································6 Analogue Tuning Menu ······················46, 49, 50 Aspect ······················································21, 87 Audio Description ·····································20, 38 Auto Gain Control ··········································38 Auto Setup ···············································13, 46 Auto Standby ·················································39 AV1 out············································
Licence Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. • DVB and the DVB logos are trademarks of the DVB Project. • SDXC Logo is a trademark of SD-3C, LLC. • HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • HDAVI Control™ is a trademark of Panasonic Corporation.
Specifications TX-P42ST31B Power Source AC 220-240 V, 50 / 60 Hz Rated Power Consumption 295 W Standby Power Consumption 0.30 W 16.00 W (With monitor out recording) Dimensions (W × H × D) Mass 355 W 1,020 mm × 675 mm × 320 mm (With Pedestal) 1,020 mm × 640 mm × 69 mm (TV only) 23.0 k Net (With Pedestal) 19.5 k Net (TV only) 1,204 mm × 779 mm × 335 mm (With Pedestal) 1,204 mm × 744 mm × 69 mm (TV only) 30.0 k Net (With Pedestal) 26.
Receiving Systems / Band name AV1 (SCART) AV2 input DVB-T Digital terrestrial services. PAL I VHF A -J CATV S1 - S20 UHF E21 - E69 CATV S21 - S41 (Hyperband) PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder. M.NTSC Playback from M.NTSC Video recorders (VCR). NTSC (AV input only) Playback from NTSC Video recorders (VCR). 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO RCA PIN Type × 1 1.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
