Operating Instructions
Viewing 3D images
33
3D Settings
If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings.
■
To return to TV
EXIT
1
Display the menu
MENU
2
Select [Picture]
Main Menu
Picture
Sound
Timer
Setup
access
select
3
Select [3D Settings]
P-NR Off
Access
On
3D Settings
Screen Display
Advanced Settings
Reset to Defaults
access
select
4
Select one of the following functions and set
3D Adjustment
Off
On
On
Access
Picture Sequence
Edge Smoother
3D Detection
3D Signal Message
Safety Precautions
3D Settings
Access
Normal
2D 3D Depth
Mid
adjust
select
access / store
Item Adjustments / Configurations (alternatives)
2D 3D Depth
Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max]
3D
Adjustment
Adjustment of the 3D effect (except in [2D 3D] mode) [Off] / [On]
•
Set to [On] to enable [Effect] setting.
•
When setting to [On], a safety precaution message will appear. Read it carefully
and then press the BACK/RETURN button to go to [Effect] setting.
[Effect] : Adjust the 3D depth according to the contents or to your preference.
Picture
Sequence
Select [Reverse] if you feel that the sense of depth is unusual (except in [2D 3D] mode)
[Normal] / [Reverse]
Edge
Smoother
Set to [On] if you feel the contoured parts of an image are not smooth enough
(except in [2D
3D] mode) [Off] / [On]
3D Detection
Automatically detects the 3D format signals [Off] / [On] / [On (Advance)]
[On (Advance)] : Detects all the 3D format signals and displays the 3D image
automatically.
[On] : Detects the particular 3D format signals (Frame Sequential, etc.) and displays
the 3D image automatically.
•
To view 3D images without any notifications and operations, set to [On (Advance)].
3D Signal
Message
Selects whether to give a notification message when a signal of 3D format is found [Off] / [On]
•
For DVB, Component and HDMI
•
This function is not available when [3D Detection] is set to [On (Advance)].
Safety
Precautions
Displays the precautions for viewing 3D images
Note
•
[3D Adjustment] and [Picture Sequence] will not be memorized when changing the input mode or channel.