Operating Instructions

Link Functions (Q-Link / VIERA Link)
83
Speaker control [Speaker Selection]
You can control the home theatre speakers with this TV remote control (point the remote control at the
TV’s signal receiver).
•
If you cannot operate, check the settings and the equipment
“Summary of Q-Link and VIERA Link features” (p. 76, 77), “Preparations” (p. 79)
1
Display [VIERA Link Menu]
2
Select [Speaker Selection]
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Home Cinema
Recorder
Start
access
select
3
Set to [Home Cinema] or [TV]
store
select
[Home Cinema]
The Player theatre, Blu-ray Disc theatre or Amplifier will be automatically
turned on if it is in Standby mode and the sound will be output from
theatre speakers connected to the equipment.
•
Volume up / down
•
Mute
•
The sound of the TV speakers is muted.
•
When the equipment is turned off, the TV speakers will be activated.
[TV]
TV speakers are active.
Multi-channel sound
If you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an
Amplifier, connect the Amplifier to the TV with an HDMI cable and an Optical
digital audio cable (p. 77), and then select “Home Cinema”. If your Amplifier
has “HDAVI Control 5” function, you only need to connect with an HDMI cable.
In this case, connect your Amplifier to the TV’s HDMI2 terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect
an HDMI cable from the DIGA Recorder to the Amplifier (p. 75).
Note
•
These functions may not work properly depending on the connected equipment.
•
Image or sound may not be available for the first few seconds when input mode is switched.
•
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or
Amplifier. Read the manual of the equipment.
•
“HDAVI Control 5” is the newest standard (current as of December, 2010) for HDAVI Control
compatible equipment. This standard is compatible with conventional HDAVI equipment.
•
To confirm this TV’s version of HDAVI Control [System Information] (p. 41)