Operating Instructions

On screen messages
9898
Message Meaning / Action
Reset to Factory Shipping
Condition Completed.
Please switch off TV.
•
[Auto Setup] will automatically start when Mains power On / Off
switch is next turned On. (p. 13)
Sending Preset Data
•
Q-Link or VIERA Link channel download is in progress.
Software successfully updated.
Press EXIT to continue.
•
The software updating is finished.
Software update failed.
Please try again later.
Press EXIT to continue.
•
Perform [System Update Search Now] in System Update (p. 58).
If this is still unsuccessful, there may not be any new software
available.
The device is not directly
connected to the TV.
The device may not work
correctly.
•
Please do not connect the device via a USB HUB.
This timer will not follow
the TV Guide information.
Press OK to continue,
RETURN to restore original
timer.
•
If you edit the start time or end time of Guide link programming by
more than 10 minutes, it will no longer be performed as Guide link
programming. The programming will be performed according to the
time setting.
Timer already expired !
•
The starting time in Timer Programming has already passed. Set
the timer correctly (p. 52).
Timer incorrect !
•
Set the start and end times in Timer Programming correctly (p. 52).
Timer overlap.
Press OK to keep,
RETURN to edit.
•
Timer programming events are overlapped. Press the OK button
to keep the overlapped setting. [Ext Rec.] are given priority over
[Reminder]. When two or more [Ext Rec.] overlap, the first timer
programming event starts and finishes as programmed. The next
timer programming event can then start.
Tuner Locked
Press EXIT to unlock and
stop recording
•
If you want to unlock the tuner, cancel Direct TV Recording
(p. 78, 80) or the recording of Timer Programming (p. 52).
Unable to download,
please check equipment
•
The tape or disc is active. Stop the equipment and try again.
3D image not available.
•
You may use a function not available for 3D effect. Exit the function
to view the 3D images.
■ Media Player
Message Meaning / Action
Cannot read file
•
The file is broken or unreadable.
Check applicable data format. (p. 88, 89)
No Device Inserted
•
Confirm the SD Card or USB device is inserted correctly.
No valid file to play
•
The card has no data.
This operation is not possible
•
The selected operation is not available.
■ Network
Message Meaning / Action
The software update is not
completed.
•
Network download failed.
Check the connections and settings. (p. 69 - 74)
Ethernet cable not
connected
•
Check the connection of the LAN cable. If you use a hub, also check
the light on the hub is lit.
•
The LAN cable might be defective.