Model No. TX-P42VT30E TX-P50VT30E Operating Instructions Plasma Television Contents Be Sure to Read Safety Precautions······················································2 Maintenance ································································3 For more detailed instructions, refer to the Operating Instructions on the CD-ROM. To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 8.
Safety Precautions Warning Handling the mains plug and lead the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) • Insert that the mains plug is easily accessible. • Ensure the earth pin on the mains plug is securely connected to prevent electrical shock. • Ensure • An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. not touch the mains plug with a wet hand.
When the TV is not going to be used for a long period of time, remove the mains plug Do not expose your ears to excessive volume from the headphones TV will still consume some power even in the Off mode, • Irreversible damage can be caused. • This as long as the mains plug is still connected to a live socket Do not apply strong force or impact to the display panel outlet. Transport only in upright position • This may cause damage resulting in injury.
Wireless LAN Adaptor and exclusive stand (p. 9) 3D Eyewear set (2) (p. 16) Terminal adaptors Satellite adaptor (p. 8) • • RF(p.adaptor 8, 9) adaptor • SCART (p. 8, 9) • Composite adaptor • Audio adaptor • Optical digital audio adaptor • COMPONENT adaptor may not be placed all together. Take care not to throw them away unintentionally. • Accessories product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young • This children accidentally.
A Assembly screw (4) (silver) E D Pole TBL5ZA3055 (TX-P42VT30E) TBL5ZA3065 (TX-P50VT30E) • • M5 × 20 Base TBL5ZX0063 (TX-P42VT30E) TBL5ZX0067 (TX-P50VT30E) • • F Cover TBL5ZB3045-1 (TX-P42VT30E) TBL5ZB3054-1 (TX-P50VT30E) • • B Assembly screw (4) (black) M5 × 25 C Assembly screw (black) M4 × 8 1 Assembling the pedestal Use the assembly screws A to fasten the pole D to the base E securely. Make sure that the screws are securely tightened.
Identifying Controls Remote Control 1 2 3 4 5 6 7 15 8 21 9 22 15 Input mode selection 3 [Main Menu] 16 Direct TV Recording • Switches TV On or Off standby 2 3D button to the viewing mode • Switches between 2D and 3D 16 17 18 19 20 to access Picture, Sound, • Press Timer and Setup Menus • Changes aspect ratio 5 Light Lights the buttons (numeric, • sound mute, last view, volume, channel) for about 5 seconds 6 [VIERA Link Menu] 7 Information 24 25 channel and programme • Displays information 8
TV 5 1 6 7 Changes the input mode 8 Mains power On / Off switch to switch the mains power. • Use If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch. 7 2 12 3 9 Remote control signal receiver not place any objects between the TV remote • Do control signal receiver and remote control. 10 C.A.T.S.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. There are some restrictions on placement for viewing 3D images. For details (p. 15, 20) Example 1 Connecting dish or aerial TV only To ensure your satellite dish is correctly installed, please consult your local dealer. Also please consult the received satellite broadcasting companies for details.
Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Rear of the TV Cable Fully wired HDMI compliant cable Set top box SCART adaptor (supplied) Terrestrial aerial AC 220-240 V 50 / 60 Hz RF cable Mains lead Fully wired SCART cable Fully wired SCART cable RF adaptor (supplied) RF cable RF OUT RF IN DVD Recorder or VCR ■ Connecting to the network environment (Network connections) • • • Wireless LAN Adaptor and exclusive stand (supplied) Insert the Wir
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 8, 9) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
5 3 [DVB-S Auto Setup] 4 [DVB-C Network Settings] DVB-S Auto Setup Satellite Astra 19.2° E 0% Progress This will take about 30 minutes. No. Channel Name Type CBBC Channel 1 Free TV BBC Radio Wales 2 Free TV E4 3 Free TV Free TV: 3 Pay TV: 0 100% Quality 100 100 100 on the country you select, select your cable provider • Depending beforehand by following the on screen instructions.
6 ■ [Wireless] Select the connection type select Connection Type Please select network connection type. access Search for access point WPS(Push button) [Search for access point] Access points found automatically are listed. 1. Select your desired access point select Available Access Points No. 1 2 3 Wireless type 11n(2.
6 [WPS(Push button)] 1. Press the WPS button on the access point until the light flashes 2. Connect the Wireless LAN Adaptor and the access point WPS(Push button) 1) Please press the ‘WPS’ button on the access point until its light flashes. 2) When the light is flashing select ‘Connect’ on TV. If you are unsure, please check the instruction manual of the access point. Connect that your access point supports WPS for this setup.
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. This TV has no full browser function and all features of websites may not be available. • 1 Turn power on for about 1 second • Press • Mains power On / Off switch should be On (p. 7).
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats. ∗1 : The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back ∗2, ∗3 : Other available 3D formats How to use the 3D Eyewear (p. 16) How to view the 3D images (p.
3D Eyewear Use Pay special attention when children are using the 3D Eyewear. 3D Eyewear should not be used by children younger than about 5 - 6 years old, as a guideline. All children must be fully supervised by parents or guardians who must ensure their safety and health throughout the using 3D Eyewear. Before using the 3D Eyewear, ensure no breakable objects surrounding the user to avoid any accidental damage or injury. Remove the 3D Eyewear before moving around to avoid falling or accidental injury.
■ Battery status shown by indicator lamp Power / indicator lamp status Battery status Lights for 2 seconds when turned on Sufficient battery level Flashes 5 times when turned on Low battery level Flashes once every 2 seconds when in use Operating normally Lights continuously when off Charging Lamp off Power off Attaching Ferrite Core Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical noise.
Disposal A lithium-ion polymer rechargeable battery is built in to the 3D Eyewear. Please discard according to local regulations. When disposing this 3D Eyewear, disassemble properly by following the procedure below, and remove the internal rechargeable battery. Do not disassemble this 3D Eyewear except when disposing of it. Danger As the rechargeable battery is specifically for this 3D Eyewear, do not use it for any other device. Do not charge the removed battery.
To view the 3D images You can enjoy the 3D images in a variety of ways. (Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.) ■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format) the 3D-compatible player via a fully wired HDMI compliant cable. • Connect mode is not switched automatically, select the input mode connected to the player. • IfIf input • you use the non 3D-compatible player, the images will be displayed on 2D mode.
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions.
Menu list Menu Item Picture How to Use Menu Functions Viewing Mode Basic picture mode [Dynamic] / [Normal] / [Cinema] / [THX (True Cinema)] / [Game] / [Photo] / [Professional1] / [Professional2] In each Viewing Mode and input, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement.
Menu Item Adjustments / Configurations (alternatives) 3D Settings 3D Detection Automatically detects the 3D format signals [Off] / [On] / [On (Advance)] [On (Advance)] : Detects all the 3D format signals and displays the 3D image automatically. [On] : Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3D image automatically.
Menu Adjustments / Configurations (alternatives) Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround Surround sound settings [Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround] [V-Audio] : Provides a dynamic enhancer of width to simulate improved spatial effects [V-Audio Surround] : Provides a dynamic enhancer of width and depth to simulate improved spatial effects [V-Audio ProSurround] : Provides a more progressive enhance
Menu Item Adjustments / Configurations (alternatives) Eco Navigation Automatically sets the TV to the most suitable energy-saving mode Recording Setup Settings for the recording feature of the USB HDD / SD Card Link Settings VIERA Link Sets to use VIERA Link functions [Off] / [On] HDMI Content Type Adjusts the picture settings according to the content type signal from the connected equipment via HDMI cable [Off] / [Auto] AV1 out Chooses the signal to be transmitted from the TV to Q-Link [TV] /
Menu Item DVB-C Tuning Menu DVB-T Tuning Menu Analogue Tuning Menu Setup How to Use Menu Functions Language Display Settings 26 Adjustments / Configurations (alternatives) Service Replacement Set to [On] to enable a message to switch to the available service (only available in some countries) [Off] / [On] Signal Condition Checks the DVB-C signal condition Attenuator Automatically reduces the DVB-C signal to avoid the interference [Off] / [On] Add TV Signal Adds the TV mode Favourites Edit Cr
Menu Item Adjustments / Configurations (alternatives) Display Settings Input Labels Labels or skips each input terminal Banner Display Timeout Sets how long the Information banner stays on screen [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds) VIERA Connect Banner Sets the VIERA Connect introduction banner display [Off] / [On] Playing Time Display Set to [On] to display a continuous record of time spent using Game mode every 30 minutes [Off] / [On] MHP Aut
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
