Operating Instructions

How to Use Menu Functions
24
Menu Item Adjustments / Configurations (alternatives)
Sound
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio] :
Provides a dynamic enhancer of width to simulate improved
spatial effects
[V-Audio Surround] :
Provides a dynamic enhancer of width and depth to simulate improved spatial effects
[V-Audio ProSurround] :
Provides a more progressive enhancer and reverberation to simulate improved spatial
effects
Auto Gain Control
Adjusts the current volume level if it is extremely different from the previous viewed
channel or input mode [Off] / [On]
Volume Correction Adjusts the volume of individual channel
or input mode
Speaker Distance to Wall Adjusts the low frequency sound [Over 30cm] / [Up to 30cm]
MPX
Selects multiplex sound mode (if available)
[Stereo] : Use this normally
[Mono] : When stereo signal cannot be received
[M1] / [M2] : Available whi
le mono signal is transmitted
Audio Preference
Selects the initial setting for audio tracks [Auto] / [Multichannel] / [Stereo] / [MPEG]
[Auto] : Automatically selects the audio tracks if programme has more than two tracks.
The
priority is given in the following order - Dolby Digital Plus, HE-AAC, Dolby
Digital, MPEG.
[Multichannel] : T he priority is given to multi-channel audio track.
[Stereo] : T he priority is given to stereo (2ch)
audio track.
[MPEG] : T he priority is given to MPEG.
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminal
s [Auto] / [PCM]
[Auto] : D olby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
HDMI1 / 2 / 3 / 4 Input
Select to
fit the input signal [Digital] / [Analogue]
[Digital] : HDMI cable connection
[Analogue] : HDMI-DVI adaptor cable connection
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2 (ARC
function) terminals if the sound does not synchronize
the image
Reset to Defaults
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings
Timer
Timer Programming Sets a timer to remind watching or record forthcoming programmes
Off Timer
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
Auto Standby
Sets the time the TV automatically goes to Stan
dby mode when no operation is
performed for the selected times [Off] / [2] / [4] (hours)