Operating Instructions

Auto Setup
Quick Start Guide
16
6
[WPS(Push button)]
1 . Press the WPS button on the access point until the light flashes
2 . Connect the Wireless LAN Adaptor and the access point
1) Please press the ‘WPS’ button on the access
point until its light ashes.
2) When the light is ashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the access point.
WPS(Push button)
C onnect
•
E nsure that your access point supports WPS for this setup.
•
WPS : Wi-Fi Protected Setup™
•
If the connection has failed, check the settings and positions of your
access point. And then, follow the on screen instructions.
3 . After the access point setting is finished, perform the connection test
C heck access point connection.
C heck acquired IP address.
C heck for devices using same IP address.
C heck gateway connection.
C heck server connection.
Connection Test
: succeeded
T he test is successful and the TV is connected to the
network.
: failed
C heck the settings and connections. And then select
[Retry].
•
T o set manually, select [Manual] and set each item.
For details (p.95)
4 . Go to the next step
7
(Press twice)
7
Select [Home]
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
H ome Shop
set
select
■ [Shop] viewing environment (for shop display only)
[ Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
•
Y ou can return to viewing environment selection screen at the stage of Shop confirmation screen and Automatic
Demo Off / On selection screen.
1 Return to viewing environment selection
screen
2 Select [Home]
Please select your viewing environment.
H ome Shop
set
select
Shop
Y ou have selected shop mode
Automatic Demo
Off O n
T o change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
[Shipping Condition](p.68)
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the satellite cable, RF cable, and then, follow the on screen instructions.
Note
•
T o check channel list at-a-glance “Using TV Guide” (p.23)
•
T o edit or hide (skip) channels “Tuning and Editing Channels” (p.54 - 59)
•
T o retune all channels [Auto Setup](p.50 -53)
•
T o add the available TV mode later [Add TV Signal] (p.46 - 48)
•
T o initialise all settings [Shipping Condition](p.68)