Operating Instructions

Timer Programming
60
Timer Programming
Timer Programming from Menu
T he Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external
recorder, the USB HDD or the SD Card. At the correct time, the TV
will tune to the correct channel even if the TV is in Standby
mode.
TV Guide may also be used to set timer programming event (p.25).
•
T his function is not available in Analogue mode.
•
T imer Programming can store up to 15 events.
•
T imer Programming only works reliably if correct time information is received via the signal from the broadcaster or service
provider.
•
F or recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must
be On.
•
N o other channel can be selected while the recording of Timer Programming is in progress.
•
I t may not be possible to record an encrypted programme (which is copy-protected).
•
When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the
TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p.105,106) and the [Link
Settings] (p.45) are completed, no setting of the recorder is required. Also read the manual of the recorder.
•
If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the recorder.
For preparations of a recorder, read the manual of the recorder.
•
F or more information of the USB HDD / SD Card Recording. (p. 74, 118)
•
R ecordings to the external recorders are always in standard definition composite video via SCART, even if the original
programme is in high definition.
•
2 minutes before the starting time, a reminder message appears if you are watching TV.
•
T o remove the message and start the programming
•
T o cancel the programming
1
Select the mode you want to set
(DVB-S, DVB-C or DVB-T)
(p.19)
2
Display the menu
3
Select [Timer]
Main Menu
Picture
Sound
Timer
Setup
access
select
4
Select [Timer Programming]
Access T imer Programming
Off Timer
Auto Standby
Of
f
Off
access
select
■
To return to TV
■
To unlock the tuner
and stop recording