Operating Instructions

USB HDD / SD Card Recording
75
Setting for USB HDD / SD Card
F ormat and setup the USB HDD / SD Card with this TV in order to use it for recording.
B efore the settings, connect the USB HDD / SD Card (p. 74) and be sure to turn on the USB HDD.
Prepare a new SD Card. Otherwise, you need to format the SD Card with this TV. (When formatting the SD Card, all data in it
will be erased.)
Prepare the USB HDD / SD Card for the exclusive use of recording with this TV.
1
Display the menu
2
Select [Setup]
Main Menu
Picture
Sound
Timer
Setup
access
select
3
Select [Recording Setup]
R ecording Setup Access
access
select
4
Select [USB HDD Setup] or [SD Card Formatting]
and set
U SB HDD Setup
O ne Touch Recording
REW LIVE
TV
Recording Setup
Off
180 minutes
Access
D efault REC Mode DR
Access SD Card
Formatting
SD Card
Information
access
select
T o check the information of the inserted SD
Card [SD Card Information]
To return to TV
Setup the USB HDD [USB HDD Setup]
All the USB devices recognised as a mass storage device will be listed.
Y ou can only choose one USB HDD for recording at a time.
Y ou cannot change the settings for the USB HDD while recording is in progress.
Please note that USB HDD will be formatted and all data in it will be erased when you format it.
1 Select the USB HDD for recording and start setup
USB Drive A
USB Flash Disk
USB HDD Setup
Product N ame
access
select
Some USB HDD may not be displayed.
F or the information of the highlighted device
2 Caution and confirmation of using USB HDD
Select [Yes] to proceed
The data recorded to the USB HDD with this TV can only
be played back on this TV.
You cannot playback it with other TV (including the TV
of the same model number) or any PCs.
If your TV is repaired due to a malfunction, the USB
HDD may not be available with your repaired TV.
Continue?
USB HDD Formatting
Y es N o
To use this device for recording,
it must be formatted rst.
Continue?
USB HDD Formatting
Y es N o
This device will be formatted and
all contents deleted.
Are you sure?
USB HDD Formatting
Y es N o
set
select [Yes]
set
select [Yes]
set
select [Yes]