Operating Instructions

- 93 -
■ To stop recording
1. Press
2. Select the programme with / and press OK to access (when 2
recordings are in progress)
3. Select Yes with
/ and press OK to stop
■ To play back or delete the recorded contents
TV programmes recorded on the USB HDD with this TV can be played back
in Media Player.
1. Display icons of the feature with APPS
2. Select Recorded TV with
/ / / and press OK to access
Media Player Recorded TV mode
●
The recorded content may not be played back properly while 2 recordings
are in progress.
Note
●
TV Guide may also be used to set timer programming event.
Watching TV Guide Timer Programming
●
Timer Programming can store up to 15 events.
●
Timer Programming only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
For recording using Timer Programming, the TV must be either on or in
Standby. For reminders to be displayed, the TV must be on.
●
Depending on the progress of recording, analogue channel may not be
selected.
●
Recording an encrypted (copy-protected) programme may not be possible.
●
2 minutes before the starting time, a reminder message may appear if you
are watching TV.
– To remove the message and start the programming, press OK.
– To cancel the programming, press EXIT.
●
LED will turn to orange in Standby mode if Timer Programming is set.
●
Timer Programming reminder messages will remain displayed until one of
the following occurs:
– You press OK to view the programme or EXIT to cancel the reminder.
– The timer programming event that the reminder is set for ends.