Operating Instructions

Quick Start Guide
Identifying Controls
11
VIERA Touch Pad Controller
This touch pad controller is designed for the convenient operations, especially, on VIERA Connect or internet contents.
You can operate the TV intuitively with this controller.
●
The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to
register will appear in “Auto Setup” for first using the TV. (p. 19)
●
After registering, you can operate the TV without pointing this controller at the TV (except Standby On / Off switch).
●
To use Standby On / Off switch, point the controller directly at the TV's remote control signal receiver (p. 12) because
it works with the infrared. (Y
ou can operate the switch without registration.)
2
∗
7
∗
9
10
1
8
5
3
∗
4
6
1
Standby On / Off switch
●
Same function of the remote control button 1 (p. 10).
2
OK
3
Touch pad (see below)
4
Exit
●
Same function of the remote control button 17 (p. 10).
5
VIERA TOOLS / On-screen remote control
●
VIERA TOOLS: Same function of the remote control button 5
(p. 10).
●
On-screen remote control: Press and hold to display the remote
control GUI (Graphical User Interface). Press again to move the
position of GUI. (To change the page of GUI, slide your finger to
the left / right on the touch pad.)
6
Volume Up / Down
●
Same function of the remote control button 12 (p. 10).
7
[Option Menu]
8
Return
●
Same function of the remote control button 20 (p. 10).
9
Channel Up / Down
●
Same function of the remote control button 23 (p. 10).
10
INTERNET ([VIERA Connect])
●
Same function of the remote control button 6 (p. 10).
∗
The behaviour may vary depending
on the mode or content.
■ Touch Pad
●
Tap the centre of the pad for “OK”.
●
Slide your finger to move the cursor
(on internet contents or [Cursor
Settings] in [VIERA
Touch Pad
Controller] (p. 46)), select the item,
adjust levels, etc.
●
Trace the fringe to scroll.
Note
●
It is recommended to hold the touch pad controller with your hand when using.
●
The battery power will be used whenever you use the touch pad controller (including the touch of the touch pad) even
if not operating the
TV. It may decrease the battery life.