Operating Instructions
Retuning from Setup Menu
51
Retuning from Setup Menu
Automatically retune the channels received in the area.
●
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are erased.
●
If Child Lock PIN number (p. 62) has been set, the PIN number is required.
●
If tuning has not been done completely [Manual Tuning] (p. 57)
DVB-S channels
1
Select DVB-S
(p. 21)
2
Display the menu and select [Setup]
Setup
select
access
3
Select [DVB-S Tuning Menu]
DVB-S Tuning Menu Access
select
access
4
Set [Antenna System] and [LNB Configuration]
Antenna System DiSEqC 1.0
LNB Configuration Access
DVB-S Tuning Menu
1 Select [Antenna System] and set
You can receive several satellites if you have DiSEqC control antenna system.
Antenna System DiSEqC 1.0
DVB-S Tuning Menu
select
access / store
●
This TV supports DiSEqC Version 1.0.
[One LNB]: Compatible with single LNB.
[MiniDiSEqC]: Up to 2 LNBs can be controlled.
[DiSEqC 1.0]: Up to 4 LNBs can be controlled.
[Single Cable]: When using the Single Cable router
, up to 8 user bands are available.
2 Select [LNB Configuration]
LNB Configuration Access
DVB-S Tuning Menu
select
access
3 Set [LNB] and [Satellite]
Set [LNB] first, then set [Satellite] for the selected LNB.
9750 MHz
10600 MHz
10744 MHz
Astra 19.2° E
AA
010
010
LNB Configuration
Signal Strength
Signal Quality
LNB
LNB Low Band Frequency
LNB High Band Frequency
Satellite
Test Transponder Frequency
select
set