Operating Instructions
Using Media Player
83
●
To repeat between the starting point “A” and finishing
point “B”
Set “A” and “B” in order
(blue)
•
The points will be reset by
pressing this button again or other
operations.
●
To change aspect
●
To the previous / next chapter
(red) / (green)
•
A recorded content is automatically divided into
chapters (about 5 minutes for each).
●
To display the subtitle (if available)
●
To confirm or change the current status (if available)
“Display the selectable settings for the current status” (p. 23)
■ Chapter List (USB HDD only)
You can start playback from the chapter list you select.
●
The chapter list is not displayed while the selected content is being recorded.
T
o play back from the chapter list
(yellow)
00:00:00 00:05:00
Chapter List
select
playback
Note
●
Depending on the recorded programmes, some playback operations may not work properly.
■ To change the device
You can change to the other device directly in the same mode if two or more devices are connected.
1 Display the
option menu
2 Select [Drive Select]
Option Menu
Create Group
Release Group
Drive Select
Contents Select
Change Protect Status
select
access
3 Select the device to access
USB HDD1 USB Flash...
Drive Select
USB HDD1
EXIT
Select
RETURN
Access
SD Card
select
access
If you select the device to play back photos, videos or music,
change to the appropriate content.
●
To change the content
select [Contents Select]
access
Audio output Settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
●
To confirm or change the current sound status (p. 81)
1 Display the menu and Select [Sound]
Sound
select
access
2 Select [SPDIF Selection] and set
2/2
SPDIF Selection
Reset to Defaults
Auto
Reset
select
access / store
Menu
Item Adjustments / Configurations (alternatives)
Sound
SPDIF Selection
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.