Operating Instructions

Timer Programming
Advanced
Check that the LED is orange. If not, timer programmes are not active or not stored.
Timer Programming reminder messages will remain displayed until one of the following occurs:
You press the OK button to view the programme or the EXIT button to cancel the reminder.
The timer programming event that the reminder is set for ends.
“!” identifies that any timer programming events have overlapped. “Ext Rec.” and “USB HDD Rec.” are given
priority over “Reminder”. As for the overlapped two or more “Ext Rec.” / “USB HDD Rec.”, the first timer
programming event starts and finishes as programmed. The next timer programming event can then start.
The recording of Timer Programming will automatically change to the programmed channel 10 seconds before
the start time.
To stop recording the timer programming event directly prior to the start time, it may be necessary to stop the
recorder manually.
The recording of Timer Programming will be performed even if the TV is in REW LIVE TV recording (p. 53) and
Pause Live TV recording (p. 77). In this case, these recordings will be cancelled.
41
Set timer programming event details
Timer Programming
Start making the settings
Select the function (Ext Rec., USB HDD Rec. or Reminder)
select
Ext Rec. /
USB HDD Rec.
: to record the programme to the external recorder (Ext Rec.) or the
USB HDD (USB HDD Rec.)
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 mins. before the
starting time, a reminder message appears if you are watching TV.
Reminder : to remind watching the programme
When you are watching TV, a reminder message appears 2 mins.
before the start time.
Press the OK button to switch to the programmed channel.
Set the channel, date and time (repeat the operations as below)
Set items in the order of
to .
select
the item
set
, and can also be
entered with numeric buttons.
abc def
jkl
ghi
mno
tuvpqrs
wxyz
Wed 28.10.2009 17:00 18:30
Date Start End
Wed 28.10.2009 18:00 20:00
--/-- --:-- --:--
Thu 29.10.2009
STTL
21:30 22:30
(90 min.)
(120 min.)
(i)
(60 min.)
Reminder
Ext Rec.
---
3
Ext Rec.
Function Channel Name
7D BBC7
<TIMER>
1D BBC1
<TIMER>
CITV1
<TIMER>
---
No.
Timer Programming USB HDD Remaining Capacity 500GB (50%) Wed 28.10.2009 10:46
Channel number
Date
Starting time
Records with subtitles (if available)
To indicate this
yellow
( press again to
remove subtitles)
Ending time
one day ahead
daily or weekly
(press repeatedly)
Duration (automatic display)
Daily Sun-Sat: Sunday to Saturday
Daily Mon-Sat: Monday to Saturday
Daily Mon-Fri: Monday to Friday
Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun:
Same time on the same day every week
Displayed if the timer programming events are overlapped
C: DVB-C
D: DVB-T
You cannot change the
mode within the menu.
Information of the USB HDD (if available)
Store
To change a timer programming event
Select the programme to be changed
access
select
Correct as necessary
(as above)
To cancel a timer programming event
Select the programme to be deleted
red
To record with subtitles (if available)
Select the programme to record with subtitles
yellow
Each time pressed:
auto off
To cancel a timer programming event temporarily
Select the programme to be cancelled
blue
Each time pressed:
cancel stop cancelling