Operating Instructions

66
Using Network Services
(DLNA / VIERA CAST)
Network settings for the Wireless LAN connection
This setting is for the network connection by using Wireless LAN Adaptor. (Wireless LAN connection)
Select “Network Type” and set to “Wireless”
Network Setup
Network Type Wireless
Access Point Settings
IP/DNS Settings
Proxy Settings
No settings
Connection Test
VIERA Name VIERA
Software Update
MAC Address ab-cd-ef-gh-ij-kl
set
select
Select “Access Point Settings”
Network Setup
Network Type Wireless
Access Point Settings
IP/DNS Settings
Proxy Settings
No settings
Connection Test
VIERA Name VIERA
Software Update
MAC Address ab-cd-ef-gh-ij-kl
access
select
Select the connection type and set
Connection Type
Please select network connection type.
WPS(Push button)
WPS(PIN)
Search for access point
Manual
access
select
For details of each connection type ● p. 67
After settings, return to “Network Setup” screen
Confirm the connection status of “Access Point Settings”
Network Setup
Network Type Wireless
Access Point Settings
IP/DNS Settings
Proxy Settings
Connected
Connection Test
VIERA Name VIERA
Software Update
MAC Address ab-cd-ef-gh-ij-kl
- - - : “Wired” is selected in “Network Type”.
No adaptor : Wireless LAN Adaptor is not connected.
No settings : Setting for connecting to the access point has not been set.
Connecting... : Connecting to the access point in progress.
Connected : Wireless LAN connection to the access point succeeded
To display the current access point settings, press the OK ●
button.
To change the settings, select “No” on this screen.
Some access points do not allow access to the internet. ●
Perform “Connection Test” (below) to check if internet
connection is available.
USB
overcurrent : Overcurrent error p. 89
Select “Connection Test” and access to test
Network Setup
Network Type Wireless
Access Point Settings
IP/DNS Settings
Proxy Settings
Connected
Connection Test
VIERA Name VIERA
Access
Software Update
MAC Address ab-cd-ef-gh-ij-kl
access
select
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
:
succeeded
The test is successful and the TV is connected to the
network.
:
failed
Check the settings and connections, and then perform
this function again.
If you continue to have difficulty, please contact your
internet service provider.
Performs automatic testing of the network
connection for the TV. (It takes a while to test.)