TV Video Accessories User Manual

Lift the display unit so that the upper insulating spacers at the back
may fit into the notched indentation at the top of the wall-hanging
bracket, and then lower the display unit into place.
1
1) Lift the display unit slightly and insert the lower insulating spacers
at the back of the display unit into the lower cutouts in the wall-
hanging bracket.
2) Lower the display unit into the lower notched part of the cutouts.
2
Do not lift the display
too high or it may come
out of the notches in the
upper indentations.
Insert and fasten the screws at both the left and right sides.
3
To prevent the display unit
from becoming detached
from the wall-hanging
bracket, make sure that
both the left and right
fixing screws are properly
fitted.
Attaching the display unit to the wall-
hanging bracket
Notches
Insultating spacer
Holding bracket
Fixing screws(left and right)
Fixing screw(M5)
4-6