Operating Instructions (For Basic Operations) Electronic Board (elite Panaboard) Model No. UB-T780 UB-T780 Stand is sold separately. Installation Manual Included (for qualified service personnel) • To assemble this unit, please refer to the Installation Manual on pages 32 through 56. • Before operating this unit, please read these instructions completely and keep them carefully for future reference. • This unit is designed for installation by a qualified servicing dealer.
Introduction Introduction Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Feature Highlights By connecting the elite Panaboard to a computer and using a projector to display the contents of the computer’s screen on the elite Panaboard, you can do the following. Electronic Pen Features • Manipulate objects on the computer screen by using the electronic pen as a mouse.
Introduction Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Serial number Dealer’s name 1 Dealer’s address Dealer’s tel no. About the Operating Instructions There are 2 separate operating manuals for the elite Panaboard. For Basic Operations (this document) Instructions for connecting and operating the elite Panaboard, as well as instructions for installation construction.
Introduction • All other trademarks identified herein are the property of their respective owners. Federal Communications Commission Requirements For United States Only Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Introduction System Requirements Computer CPU Interface IBM® PC/AT® or compatible with a CD-ROM drive Intel® Pentium® 4 processor or later USB 2.0 Note • For details about the system requirements, refer to the Operating Instructions (For Software). Exemption of Liability Panasonic System Networks Co., Ltd. is not responsible for accidents or injuries caused by, but not limited to, the following: 1. Altering the device or improper installation construction. 2.
Table of Contents Table of Contents For Your Safety ........................................................................................7 For Your Safety .................................................................................................................7 For Users ...........................................................................................................................7 Safety Information (For United Kingdom Only) ..........................................................
For Your Safety For Your Safety For Your Safety To prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper and safe operation of your unit. • This section explains the graphic symbols used in this manual. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes hazards that could result in minor injury or damage to the unit.
For Your Safety Plug the power cord firmly into an AC outlet. Otherwise, it can cause fire or electric shock. Installation and Relocation Have the unit installed, removed and disposed of only by qualified service personnel. Do not pull, bend, rest objects on, or chafe the power cord and plug. Damage to the power cord or plug can cause fire or electric shock. Do not attempt to repair the power cord, or plug.
For Your Safety Make sure that the battery is installed with the correct polarity as indicated on the battery holder. Incorrectly installed batteries may burst or leak, resulting in injuries. Batteries that seem worn down or damaged should not be used. Using worn down or damaged batteries may result in leaking. Do not charge, short, heat, break or throw in a fire, as it may result in the battery leaking, generating heat, or bursting.
For Your Safety After installing or moving the unit, lock the casters and set the fall-prevention extension legs. Locking the casters (Push this side) Push to lock Operating Safeguards If the unit falls down or gets damaged, turn the unit off and unplug the power cord. Otherwise, it may cause fire or electric shock. Do not lean against the screen or on the cover (lower), even if the unit is mounted on the wall.
For Your Safety As the colours of the wire in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire that is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire that is coloured BLUE must be connected to the terminal in the plug that is marked with the letter N or coloured BLACK.
For Your Safety Warning Label 12 WARNING: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Usage Usage Included Accessories Check that all of the following items are included with your elite Panaboard. In the event that an item is missing, please contact your dealer. List of Accessories Power Cord (3 m [9 ft. 10 1/8 in.]) 1 USB Cable (5 m [16 ft. 4 7/8 in.
Usage Names and Uses of the Parts Screen Front View Position Sensor Detects the position of the electronic pen. Do not block the sensor while operating the elite Panaboard. Screen Board Project the contents of a computer screen using a projector. Power Switch Pen Tray Push the center of the door to open the pen tray, which can hold up to 2 electronic pens. Status LEDs Left: Power LED (green) Lights green when the power is on. Right: Error LED (red) Blinks red when an error occurs.
Usage Electronic Pen Penpoint When you push down on the penpoint, ultrasonic waves and infrared signals are transmitted, and equivalent of a left mouse click is performed. Ultrasonic Emitter Do not block this area with your fingers. Doing so will prevent the elite Panaboard from correctly detecting the electronic pen's position. 1 Infrared Emitter Do not block this area with your fingers. Doing so will prevent the elite Panaboard from correctly detecting the electronic pen's position.
Usage Inserting (Replacing) Batteries 1. Remove (replace) the battery cover. • 16 When replacing the cover, follow the procedure in reverse. Operating Instructions (For Basic Operations) 2. Insert (exchange) the battery and replace the cover. • Make sure to use a AAA alkaline battery, and ensure that and face the correct directions.
Usage Connecting External Components 1. Set the power switch to "O" (OFF), connect the power cord (included) to the elite Panaboard, and plug the power cord into an AC outlet. Rear Power Switch (ON) (OFF) 1 Power Cord (Included) Power Cord • • Plug the power cord into an outlet that is close to the elite Panaboard and in a location that is easy to unplug. If you are using the optional stand, plug the power cord into the AC inlet, and secure the cord as shown in the illustrations below.
Usage 2. Connect the elite Panaboard to a computer using the USB cable (included). • elite Panaboard: Plug the B connector (smaller connector) into the elite Panaboard's USB port. • Computer: Plug the A connector (larger connector) into a USB port on the computer. Do not connect the elite Panaboard via a USB hub. This could result in erroneous operation. To USB Port USB Cable (Included) Projector Computer AC Video Cable AC 3. Connect the computer to a projector.
Usage Moving the elite Panaboard When Using the Stand (Sold Separately) 1. Make sure that the power switch is set to "O" (OFF), and disconnect the power cord and USB cable. 2. Release the locks on the casters. 3. Move the elite Panaboard, avoid banging or shaking the board. Notice • • Always move the elite Panaboard with 2 people. Do not drag or step on the cable. 4. Lock the casters.
Usage Installing the elite Panaboard software You need to install the elite Panaboard software on the computer that will be used with the elite Panaboard. To install the elite Panaboard software, follow the procedure below. Notice • • Do not connect the USB cable until the installation is completed. Do not connect more than 1 elite Panaboard to the same computer. (Doing so can cause erroneous behavior on the computer.) 1. Turn on your computer and start the Windows 2. 3. 4. 5. operating system.
Usage Setting the Projector Set up your projector as instructed below. Project the Image as a Rectangle • Adjust the location of the projector to project at a right angle with the elite Panaboard. About Positioning the Image • When you are projecting an image, make sure that the edge of the projected image is at least 5 mm (1/4 in.) from the screen frame. The electronic pen may not function correctly within 50 mm (2 in.) of the position sensor in the upper-left corner of the screen board. 50 mm (2 in.
Usage • If the image is projected trapezoidally, the position of the electronic pen may not be read correctly. Adjust the projector so that the projected image is a rectangle. Refer to your projector's documentation for information on adjusting the projected image.
Usage Starting the elite Panaboard software and Performing Calibration 1. Turn on the elite Panaboard. 2. Connect the elite Panaboard to your computer with the USB cable. • The elite Panaboard software starts automatically. • When you start the elite Panaboard software for the first time, the calibration screen is displayed. • Restart your computer if you are prompted to do so. After the computer has restarted, connect the elite Panaboard to your computer with the USB cable. 3. Perform calibration. 4.
Usage • After calibration has completed, the icon is displayed in the notification area, and the Desktop Drawing Tool is automatically displayed. Uninstalling the elite Panaboard software If it is necessary to uninstall the elite Panaboard software, follow the procedure below. 1. Turn on your computer and start Windows. • Log into an account with Administrator privileges. 2. Select [Add or Remove Programs] from the Control Panel.
Usage Viewing the Electronic Documentation Follow the procedure below to view the electronic documentation "Operating Instructions (For Software)". 1. Turn on your computer and start Windows. 2. Open "Operating Instructions (For Software)" from the Start menu. ([Start] ® [All Programs] ® [Panasonic] ® [elite Panaboard] ® [Operating Instructions for Software]) • The electronic documentation will be displayed. • For Windows 2000, [Programs] is displayed instead of [All Programs].
Appendix Appendix Daily Care When cleaning the elite Panaboard or inside the elite Panaboard, make sure to switch off the power and unplug the power cord from the AC outlet. Cleaning the elite Panaboard Replacing the Battery in the Electronic Pen When the charge in the battery in the electronic pen is low, the message, "The pen battery is low. Replace the battery soon." will be displayed on the computer screen. Continued use of the electronic pen can lead to poor performance.
Appendix Replacing the Penpoint of the Electronic Pen As the penpoint of the electronic pen becomes worn, a hole will appear in the penpoint. Continuing to use the electronic pen in this condition can cause damage to the screen or unsatisfactory operation, so replace the penpoint with a new one as soon as possible.
Appendix Troubleshooting When experiencing problems, please refer to the table below for possible solutions. If the problem persists, contact your dealer. Symptom Possible cause and solution See page The LEDs do not light when the power switch is turned on. Check that the power cord is properly plugged in. → If the problem persists, turn off the power, and then turn it on. – Red LED is blinking. Turn off the power, and turn it on. → If the problem persists, contact your dealer.
Appendix Symptom Possible cause and solution See page The message "The pen battery is low. Replace the battery soon." is displayed on the computer screen. The electronic pen’s battery is weak. → Replace the electronic pen’s battery. 16 26 Marks written with a white-board marker cannot be erased. Because the elite Panaboard is designed exclusively for projector images, you cannot erase the marks with a standard eraser.
Appendix Specifications Model Number General UB-T780 Power AC 100 V-240 V, 50 Hz/60 Hz Power Consumption: During Operation 0.1 A External Dimensions: Height ´ Width ´ Depth 1,340 mm ´ 1,752 mm ´ 89 mm (4 ft. 4 3/4 in. ´ 5 ft. 9 in. ´ 3 1/2 in.) Weight 26 kg (57.32 lbs) Operating Environment Temperature: 15 °C to 35 °C (59 °F to 95 °F) Humidity: 30 % to 80 % Storage Environment Temperature: -20 °C to 40 °C (-4 °F to 104 °F) Humidity: 15 % to 80 % Interface USB 2.
Appendix Supplies & Accessories Optional Device • Electronic Pen UE-608025 Stand KX-B061 Install-Free Kit UE-608050 To purchase separately sold items, contact your dealer.
Installation Manual Installation Manual Installation Manual (for qualified service personnel) • • • Request assembly of the Electronic Board, stand and wall mounting from your dealer. Before constructing or installing the elite Panaboard, please read "Installation Manual (for qualified service personnel)" carefully. Especially, please read "For Your Safety" carefully and install the elite Panaboard safely. Panasonic System Networks Co., Ltd.
Installation Manual Have the unit installed, removed and disposed of only by qualified service personnel. CAUTION After installing or moving the electronic board, lock the casters and set the fall-prevention extension legs. 1 Locking the casters (Push this side) Push to lock If the unit is hung on a wall, confirm the wall must be capable of supporting at least the following weight. 1,324 N (135 kgf) Do not attach the electronic board to mortared walls.
Installation Manual Included Accessories Confirm that the following items are included with the elite Panaboard. No. Part Name Q’ty Remarks Power Cord (3 m [9 ft. 10 1/8 in.]) 1 The illustration of the power cord is for the United States. The shape of the plug may vary depending on country/area. USB Cable (5 m [16 ft. 4 7/8 in.
Installation Manual No. Part Name Warranty Illustration Q’ty 1 Remarks May not be included depending on country/ area. Notice • Screws (8 count) for wall mounting are not included. Please purchase screws with a size of M6, appropriate for your type of wall (page 38).
Installation Manual Wall Mounting Construction Checking the Wall When mounting on a wall, consult with your building's owner, caretaker or construction manager to determine if the wall strength is sufficient to install the elite Panaboard. For safety, install the elite Panaboard only after thoroughly understanding the type of walls, the appropriate types of screws and the construction method (Page 38). CAUTION Do not attach the electronic board to mortared walls.
Installation Manual Installing the Wall Mounting Plates 1. Ensure that the wall is strong enough to support the elite Panaboard. Rated strength: greater than 1,324 N (135 kgf) 2. Using the measuring tape and level, mark the 8 locations to insert the screws. 469.5 mm (1 ft. 6 15/32 in.) 813 mm (2 ft. 8 in.) 222.5 mm (8 3/4 in.) 40 mm (1 9/16 in.) 1 982 mm (3 ft. 2 21/32 in.) 725 mm (2 ft. 4 17/32 in.) 30 mm (1 3/16 in.) 44 mm (1 23/32 in.
Installation Manual • • Tighten the bolt so that it will not become loose. When drilling the holes and installing the wall mounting plates, follow the procedure in "Wall Types and Installation Procedures" (page 38). 5. Mount the elite Panaboard on the wall. See "Assembling the elite Panaboard" (page 45). Wall Types and Installation Procedures The method for attaching the wall mounting plates to the wall will vary depending on the wall's structure. Three available options are listed below.
Installation Manual Plasterboard walls Split-wing toggles (not included) are needed. Split-wing toggle Wall mounting plate Plasterboard Bolt Arms Insert the bolt through the hole in the wall mounting plate and into the hole in the wall so that the arms of the split-wing toggle are horizontal. For the correct hole size, refer to the instructions for the particular split-wing toggles used.
Installation Manual Stand Assembly (Sold Separately) Included Parts Check that the following parts are included with the stand (KX-B061). Part Name No. 40 Illustration Q'ty Stand Base 2 Support Beam 2 Cross Bar (A) 2 Cross Bar (B) 1 Screw (M6 ´ 45 mm [1 3/4 in.]) 10 Two-wing Bolt (M5 ´ 12 mm [1/2 in.])*1 2 Support Bracket 2 Fall-prevention Extension Leg 4 Screw (M6 ´ 60 mm [2 3/8 in.
Installation Manual CAUTION Before assembly, be sure to lock the casters. Locking the casters (Push this side) Assembly Instructions 1 1. Assemble the fall-prevention extension legs.
Installation Manual 2. Assemble the stand. Assemble with the holes toward the front. Locking caster side (rear) FRONT REAR Locking caster side (rear) Notice • • 42 Do not over-tighten the screw ( ). (Doing so can warp the support beams.) Assemble the stand so that the locking casters are on the rear side.
Installation Manual 3. Pull the fall-prevention extension legs down. 1 2 Note • When folding back the fall-prevention extension legs, release the lock as follows ( 1 , 2 ). 1 1 1 2 4. Mount the elite Panaboard. See "Assembling the elite Panaboard" (For Mounting on a Stand (Sold Separately) ® page 52).
Installation Manual Assembly Instructions Preparing for Removing the elite Panaboard from Its Packaging Open the box, remove the accessory box & packing foam and open the plastic sheet of the elite Panaboard. Shipping Box [Accessory Box Contents] • • • • • Electronic Board • • • • • • Power Cord . . . . . . . . . . . . . . 1 USB Cable . . . . . . . . . . . . . . . 1 CD-ROM . . . . . . . . . . . . . . . . 1 Cable Holder . . . . . . . . . . . . 1 Wall Mounting Plate (Right, Left) . . . . . . .
Installation Manual Assembling the elite Panaboard For Wall Mounting (with 2-part lower frame cover) Note • There are 2 types of lower frame covers for the elite Panaboard: a lower frame cover made from 2 parts and a lower frame cover made from 1 part. If you will be mounting elite Panaboard on a wall, the assembly procedure will differ depending on the type of lower frame cover. Follow the steps below: 1. Loosely wrap the power cord with the cable tie, and plug the power cord into the AC inlet.
Installation Manual 3. Pull the loose end of the cable tie to tighten it, and install the power cord depending on the location of the outlet, as illustrated in the following diagrams. • When attaching the power cord downward. Fasten the power cord with the cable tie. 4. Remove the screw (A) of the attachment cover (B), which is fixed to the attachment board, and slide the attachment cover down. Ensure that the attachment cover and the screw hole (C) of the board attachment are aligned.
Installation Manual 6. Unscrew the 4 screws from the front lower frame cover. 8. Fasten to the wall. Fasten the lower portion of the board attachment securely to the wall. 1 7. Lift the bottom of the front lower frame cover to remove it. 9. Attach the front lower frame cover. Attach the front lower frame cover to the elite Panaboard and fix it using 4 screws, ensuring that the cover is flush with the main unit. Notice • • When mounting on a wall, do not hit or jolt the elite Panaboard.
Installation Manual 10. Wipe the screen board surface. Gently wipe the screen board surface with a soft, moist cloth. For Wall Mounting (with 1-part lower frame cover) 1. Loosely wrap the power cord with the cable tie, and plug the power cord into the AC inlet. • Connect the power cord to the elite Panaboard before installing on a wall. Power Cord 2 Notice • 1 Do not use thinner, benzene, or abrasive chemicals to clean. (Doing so can result in discoloration.) 11.
Installation Manual 3. Pull the loose end of the cable tie to tighten it, and install the power cord depending on the location of the outlet, as illustrated in the following diagrams. • When attaching the power cord downward. Fasten the power cord with the cable tie. 4. Remove the screw (A) of the attachment cover (B), which is fixed to the attachment board, and slide the attachment cover down. Ensure that the attachment cover and the screw hole (C) of the board attachment are aligned.
Installation Manual 6. Remove the lower frame cover. Remove the left and right screws, and then remove the lower frame cover from the main unit of the elite Panaboard. How to Attach the Lower Frame Cover a. Holding the lower frame cover with both hands, slide it into the guides on both sides. b. Push the lower frame cover backward ( 1 ). Lower Frame Cover While keeping the lower frame cover's rib against the rear side of the guides, push the lower frame cover upwards ( 2 ). 7. Fasten to the wall.
Installation Manual c. Pull the lower frame cover ( 1 ). While keeping the rear section of the lower frame cover against the rear of the board, push the lower frame cover up into the rear of the board ( 2 ). 9. Wipe the screen board surface. Gently wipe the screen board surface with a soft, moist cloth. B A 1 d. Push the lower frame cover backward ( 1 ). Push the entire lower frame cover up until both ends lock into place ( 2 ). Fasten the 2 screws on the bottom side.
Installation Manual For Mounting on a Stand (Sold Separately) • When attaching the power cord along the lower side of the elite Panaboard. 1. Attach the power cord. • Connect the power cord to the elite Panaboard before installing on the stand. Power Cord 3. Hang the elite Panaboard on the stand with the screw heads. 2. Depending on the location of the outlet, install the power cord as illustrated in the following diagrams. • When attaching the power cord downward.
Installation Manual 4. Secure the elite Panaboard to the stand frame using the two-wing bolts (M5 ´ 12 mm [1/2 in.] [2 count]) included with the stand. 5. Wipe the screen board surface. Gently wipe the screen board surface with a soft, moist cloth. 1 Notice • Do not use thinner, benzene, or abrasive chemicals to clean. (Doing so can result in discoloration.) 6. Confirm that the elite Panaboard can operate. See "Confirming the elite Panaboard Operation" (page 54).
Installation Manual Confirming the elite Panaboard Operation After assembling the elite Panaboard, confirm that it operates properly by following the procedure below. Checkpoints Action Operation 1 Turn on the power. Measure Green LED lights. (Normal operation) Green LED does not light, or red LED is blinking. Check the power cord. See step 1 of "Assembling the elite Panaboard".
Installation Manual • With the elite Panaboard software running, enter White Background mode and select the marker tool. Confirm operation by writing on the screen board with the electronic pen and checking that the writing is displayed on the computer's screen. (Your writing with the electronic pen will not appear on the screen board itself.
Installation Manual Repackaging To repackage the elite Panaboard, perform steps in the following "Assembling the elite Panaboard" in reverse. For Wall Mounting (with 2-part lower frame cover) ® page 45 For Wall Mounting (with 1-part lower frame cover) ® page 48 For Mounting on a Stand (Sold Separately) ® page 52 • • • Package the unit as depicted in the diagram in "Preparing for Removing the elite Panaboard from Its Packaging" (page 44), and reinforce the packaging with tape or 2 bands.
Notes 1 Operating Instructions (For Basic Operations) 57
Notes 58 Operating Instructions (For Basic Operations)
Notes 1 Operating Instructions (For Basic Operations) 59
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.