User Guide

6
Getting Started
First-time Operation
■ Preparation
Check and identify the supplied accessories.
If you do not find the described accessories, contact Panasonic Technical Support.
•
AC Adaptor . . . 1
Model No:
CF-AA5713A
• AC Cord . . . . 1 • Soft Cloth . . . 1
è Reference Manual
“Screen Input Operation”
• Operating Instructions (CD-ROM / -R) . . . . . . . . . . . . . . . . . . . . . . 1
• Safety Precautions and Regulatory Information . . . . . . . . . . . . . 1
• Before using this computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s
packaging (è page 25).
1 Connect your computer to a power outlet
The battery charging starts automatically.
CAUTION
●
Do not disconnect the AC adaptor until the first-time
operation procedure is completed.
●
When using the computer for the first time, do not
connect any peripheral device except AC adaptor.
●
Handling the AC adaptor
•
Problems such as sudden voltage drops may arise
during periods of thunder and lightning. Since this
could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless
running from the built-in battery alone.
2 Turn on the computer
Press and hold the power switch until the power indicator lights (è page 4).
CAUTION
●
Do not press the power switch repeatedly or do not hold the power switch for four seconds or longer.
●
Any changes from the default setting of the Setup Utility must not be made until the First-time
Operation is completed.
3 Select language
Select language and touch [Next].
Follow the on-screen instructions.
4 Setup Windows
Follow the on-screen instructions.
●
The computer restarts several times. Wait until the drive indicator has turned off.
●
After the computer is turned on, the screen remains black or unchanged for a while, but this is
not a malfunction. Wait for a moment until the Windows setup screen appears.
●
Setup of Windows will take approximately 5 minutes.
Go to the next step, confirming each message on the display.
●
If "Get online" is displayed, select [Skip this step].
You can set the Wireless Network after the setup of Windows is complete.