Manual

3 Export video clips to PC using DVD-MovieAIbumSE.

4 DVDfunSTUDIO program will automatically start. (see page 144 for details)

5 Edit video clip files and introduce interactive DVD menus using DVDfunSTUDIO Software.

Insert a new DVD-R disc into the DVD Video Camera.

• When making an original DVD-R disc using DVDfunSTUDIO software, a message for initialization

appears on the LCD of DVD Video Camera. Select"No" and then follow the instructions onthe screen

of your PC to make the original DVD-R disc. Do not perform initialization of the DVD-R disc on the

Video Camera when using a DVD-R disc with your computer.

7 Write the final movie to the DVD-R disc with DVDfunSTUDIO.

• Write thefinal movietoan 8 cm DVD-Rdiscinthis DVDVideoCamerausingDVDfunSTUDIOsoftware.

Cautions for use

• When you are making a recording on a new DVD-R disc inyour DVD Video Camera, you must initialize

the disc before recording video clips. DVD-RAM disc and SD Memory Card do not require

initialization.

• DVD-R discs are a one time write format; therefore, when you write information to the DVD-R disc

with DVDfunSTUDIO, you cannot edit it again.

DVD-MovieAIbumSE software on Windows 2000 Professional / XP Home Edition /

• When using ®

XP Professional, log on to your PC as Administrator.

• Set the display resolution to 1024 x 768 (16 bits color) or higher,

Display Settings method as follows:

Select "Start" >> "Control Panel" >> "Display" and select "Settings" tab on "Display", and then adjust "Screen

Resolution" and "Color quality".

• Depending on the condition of your PC, it may take a long time to install the software.