Manual

Setting Up Record Functions

Switching Movie Quality (VIDEO Mode)

Choose the movie quality from "XTRA", "FINE" and "STD".

/ Press the MENU button,

choose"VIDEO Mode" on

the "Record Functions

Setup" menu screen, and

then press the ,/ll

button.

2 Choose the desired quality mode, and then

press the I,-/ll button.

3 Press the MENU button to end the setting.

Note:

• The movie quality setting will be stored in memory even

when the DVD Video Camera is turned off.

• When using DVD-R disc, you cannot switch the movie

quality while recording on the disc: The DVD Video

Camera will be automatically set to the movie quality first

used with the disc for recording.

• The movie quality setting is effective only during movie

recording: The setting will not be displayed during

recording of stills.

REM30 MIN

Movie qualit M 800_M$EP30 2005

Block-like noise may appear in recorded image, or the outline of subject image is distorted under the

recording conditions listed below. Pan the DVD Video Camera as slowly as possible. (Block noise is likely

to appear in "STD" mode):

• If there is a complicated pattern in the background (as in figure on botton left)

• If the DVD Video Camera is moved excessively or quickly

• If subject is moving rapidly even when the DVD Video Camera is not moving

(Image when block-like noise occurs) (Imagewithout block-likenoise)