Manual

Note:

• The PHOTO Input setting can be confirmed using the on-

screen information.

• The PHOTO Input setting will be stored in memory even

when the DVD Video Camera is turned off.

• Refer to Recording (Dubbing) Images" on page 75 to

see how to connect the DVD Video Camera to another

device.

• "PHOTO Input" is displayed only when Input Source" is

set to "LINE" or S LINE" (VDR-M75PP/VDR-M95PP

only).

• "OSD Output" is displayed onlywhen Input Source" is set

to "CAMERA".

Self Timer

You can record photos using the self timer function, as with ordinary cameras.

Q =r_ra'_

| Press the MENU button,

choose "Self Timer" on

the "Record Functions

Setup" menu screen, and

then press the ,/tl

button.

I _iENTER (_}RETURN RAM I

2 Select "On", and then press the ,/tl button.

The self timer will be set.

3 Press the MENU button to end the setting.

Self timer recording

SEP_02_05

4 Press the Photo shot button.

The recording indicator at the front of DVD Video

Camera will blink.

The Self timer indicator will start to count down,

and recording will commence approximately 10

seconds later.

Note:

• You can also check that self timer has been set by

reviewing the on-screen information.

• To release the self timer mode. choose Off" on the menu

screen or turn DVD Video Camera off.

• To suspend self timer, press the Photo shot button again

before recording starts, or press the • button.

• PHOTO Input" is displayed only when Input Source" is

set to LINE" or "S LINE" (VDR-M75PP/VDR-M95PP

only).

• OS DOutput" is displayed only when "Input Source" is set

to CAMERA".