Operating instructions
114
English
QR34653
1
Updating Control Information of DVD-RAM Disc
Disc Navigation in this DVD video camera/recorder handles information on scenes, such as skip, fade, in
a particular manner. If you use another device to edit a disc recorded on this DVD video camera/recorder,
and then use the data again with Disc Navigation in this DVD video camera/recorder, the Disc Navigation
may not appear normally. If this happens, use the Update Control Info function to update the data.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Choose “Update Control Info.” on the “Disc”
menu screen, and then press the A button.
The screen for verifying “Update Control Info.”
will appear.
4 Choose “YES”, and then
press the A button.
The message for
proceeding will appear,
and then the Disc
Navigation menu screen
will be restored.
A black screen may appear while the message
for updating is displayed.
Choose “NO” to cancel updating.
5 Press the B button to quit.
Note:
• Be sure to use the AC adapter/charger when updating the
control information so that the DVD video camera/
recorder is not turned off midway. If updating of control
information is interrupted by power off, the control
information will not be updated correctly.
• It may take time to update the control information if the
disc has many recorded scenes.
• Pressing the B button on the screen for verification will
restore the thumbnail display screen.
ENTER
Upda te Control Info?
Upda te Control Info.
YES NO
ENG.book 114 ページ 2003年3月20日 木曜日 午後4時49分