Operating instructions

129
English
QR34653
Creating DVD Video on PC from DVD-RAM Disc
Recorded on DVD Video Camera/Recorder
Using DVD-MovieAlbumSE and MyDVD, you can create a DVD video (DVD-R disc) from the images
recorded on this DVD video camera/recorder, following the procedure below:
1 Insert a recorded DVD-RAM disc into the DVD
video camera/recorder, and connect the DVD
video camera/recorder to the USB terminal of
PC.
2 Start DVD-MovieAlbumSE, and edit the images
on DVD-RAM disc as necessary.
3 Right-click the thumbnail from which you wish to
create a DVD video on the DVD-MovieAlbumSE
screen, and execute “Export”.
4 The “Program Export” screen, shown below, will
appear: Choose “Same Resolution” and check
“Use DVD-Video” in the “Export Mode” setting
box. Choose “704 × 480 (recommended)” for
“Resolution”.
Note:
• Choose “Divide by Marker” in the “Option” box: Each
scene of programme recorded on the DVD video
camera/recorder will be saved as an independent
movie file so that export can be executed at high
speed. If you do not choose “Divide by Marker”, movie
files may be unified and re-encoded, so it may take
time to export them or the image quality may slightly
deteriorate. DVD-MovieAlbumSE may automatically
encode a movie recorded in the XTRA mode
containing rapidly moving scenes (8 Mbps or higher),
regardless of the “Divide by Marker” setting.
• Do not choose “Simple Export” in the “Export Mode”
setting box: Choosing it may stop export midway.
5 Click the Start button to start export.
6 When export is complete, message “The file
exporting was completed successfully. Do you
wish to create a ‘DVD-Video’ disc or an ‘MPEG
file’ disc?” will appear. Check the small box for
“Eject the disc being used”, and then click “Yes”.
Insert a brand-new DVD-R disc into the DVD
video camera/recorder.
7 DVD-MovieAlbumSE will automatically end, and
the “Export to Disc” screen will appear: Click the
“Start” button.
“Program Export” Screen
ENG.book 129 ページ ２００３年３月２０日 木曜日 午後４時４９分