Operating instructions

23
English
QR34653
Setups
This section explains preparations for recording - setting up the DVD video camera/recorder and
battery.
Setting Up the DVD Video Camera/Recorder
Holding DVD Video Camera/Recorder
Insert your right hand from the bottom of DVD video
camera/recorder up to the base of your thumb.
Put your hand in a
position where you can
easily operate the REC
button and the Zoom
lever.
Adjust the length of hand
strap so that the DVD
video camera/recorder
is stable when you press
the REC button with your thumb.
Note:
Do not adjust the hand strap while holding the DVD video
camera/recorder: Doing this could cause the DVD video
camera/recorder to fall and be damaged.
Attaching Lens Cap
Pass the provided string through the hole in the lens cap and attach it to the hand strap of DVD video
camera/recorder.
1 Use the string to attach the cap to the DVD video
camera/recorder.
2 Push the both sides of cap inward and attach it
over the lens.
Note:
• Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
• When recording, attach the lens cap to the hand strap by
hooking the tab inside the cap onto strap for comfortable
shooting.
Caution:
Do not lift the DVD video camera/recorder by
holding the viewfinder or LCD monitor: If the
viewfinder or LCD monitor comes off, the DVD video
camera/recorder will fall.
Push and fit
ENG.book 23 ページ ２００３年３月２０日 木曜日 午後４時４９分