Operating instructions

44
English
QR34653
13
Recording Stills
Note:
Recording of still images is possible on DVD-RAM disc and
card.
1 Turn the DVD camera/recorder on.
When using DVD-RAM disc:
Set the power switch to “N PHOTO”.
When using card:
Set the power switch to “P PHOTO”.
After the ACCESS indicator goes out, perform
the subsequent operation:
2 Check the subject on the screen (viewfinder or
LCD).
3 Press the REC button.
The DVD video camera/recorder automatically
focuses on the subject at the centre of screen
(when auto focus is selected).
The screen will be black, and then the recorded
still will be displayed. When the “m” mark
appears, you can proceed with the next
recording; while “DISC ACCESS” or “CARD
ACCESS” is being displayed, you cannot
proceed with the next recording.
4 Set the power switch to “POWER OFF” to turn
the DVD video camera/recorder off.
Note:
• See “Still recording quality” on page 45 for details of stills
on card.
• Do not operate the power switch or remove the card while
the ACCCSS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
ACCESS/PC
indicator
CARD
ACCESS
indicator
Power switch
999
REM
17:00
30/ 9/2003
Still recording mode
Number of recordable stills
(When using DVD-RAM disc)
FINE
999
REM
17:00
30/ 9/2003
(When using card)
Still recording mode
Number of recordable stills
ENG.book 44 ページ ２００３年３月２０日 木曜日 午後４時４９分