Operating instructions

56
English
QR34653
Playing Back
123
Immediately Checking Recorded Scene
You can check your recording immediately on the spot.
1 Press A button in the recording pause status.
The DVD video camera/recorder will enter the
playback mode, and the scene you have
recorded last will be played back.
When playback is finished, the DVD video
camera/recorder will enter the pause status at
the last image on disc.
If the playback pause status continues for as
long as 5 minutes, the DVD video camera/
recorder will automatically return to the
recording pause status.
2 Press the B button.
Playback will stop, and recording pause status
will be restored.
Note:
• If the LCD monitor is open during playback of movie,
playback sound will be heard from the speaker. Adjust
the sound volume using the volume control buttons (
S,
R).
• To temporarily stop playback, press the A button.
Press the
A button again to restart playback.
• Even if you stop playback midway and immediately start
recording again, the new image will be recorded after the
last scene on disc or card (the previous images will not be
overwritten).
• When playing back a still with a large number of pixels on
card, “Playback.” will appear, and it will take some time
for the still to appear.
• Depending on the amount of data to be played back, it
may take some time for the playback image to appear.
• Do not operate the power switch or remove the card while
the ACCCSS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
Tilt up/down and to left/
right to select, and then
press
A to designate.
ENG.book 56 ページ ２００３年３月２０日 木曜日 午後４時４９分