Operating instructions

71
English
QR34653
Magnifying Subject Image (Dig. Zoom)
When the zoom lever is moved to “T” control side with Dig. Zoom 40× or 240× specified, digital zoom will
automatically kick in when optical 10× zoom range is exceeded. You can set the digital zoom to 40× or 240×
for movie recording, or 40× for still recording.
1 Press the MENU button,
choose “Dig. Zoom” on
the “Camera Functions
Setup” menu screen, and
then press the A
button.
2 Choose the desired magnification, and then
press the A button.
3 Press the MENU button to end the setting.
Moving the zoom lever will display the digital
zoom bar.
Dig. Zoom “240×”, “40×” or “Off” setting will be
stored in memory even if the DVD video camera/
recorder is turned off.
Note:
• You can check whether Dig. Zoom is “240×”, “40×” or
“Off” by pressing the DISPLAY button and reviewing the
on-screen information.
• You can also use the DIGITAL ZOOM button on remote
control to switch the digital zoom setting: Pressing the
button during movie recording will switch the setting
between “Off”, “40×” and “240×”: Pressing the button
during still recording will switch between “Off” and “40×”.
• When using card, zooming only up to 40× is possible,
even when “240×” or “40×” has been chosen.
• If the power switch is set to “N PHOTO” with DVD-RAM
disc loaded, zooming only up to 40× is possible, even
when “240×” has been chosen.
Ca m era Funct i ons Setup
Progra
m AE
W hi te Bal.
Dig.Z
oom
EIS
40x
240x
ENTER RETURN
RAM
Of f
MIC.Fi l ter
16:9
17:00
30/ 9/2003
3 0 MIN
0:00:00
REM
FINE
TW
W
W
T
T
When Dig. Zoom is "Off"
When Dig. Zoom is "On"(40x)
Digital zoom range
When Dig. Zoom is "On"(240x)
Digital zoom range
(only in movie recording)
ENG.book 71 ページ ２００３年３月２０日 木曜日 午後４時４９分