Operating instructions

83
English
QR34653
Terminating Disc Navigation
1 Press the DISC NAVIGATION button.
Disc Navigation will be terminated and the DVD
video camera/recorder will enter the recording
pause status.
You can also press the B button to end Disc
Navigation.
Playing Back from Disc Navigation Screen
1 Press the DISC NAVIGATION button.
2 Use the joystick to select the desired scene.
The selected scene will be framed: This is called
a “cursor”.
3 Press the A button.
Playback will start from the selected scene.
Note:
Tilting the joystick to left or right will move the cursor to
the preceding or following scene.
Tilting it up or down will move to preceding or following
page.
lWhen playback ends:
The DVD video camera/
recorder will enter the
playback pause status at the
last image of last scene.
Pressing the B or DISC
NAVIGATION button will
restore the Disc Navigation
screen.
When the playback pause status continues for as
long as 5 minutes, the Disc Navigation screen will
automatically be restored.
lPlaying back stills
A still will be displayed for approx. 3 seconds.
When playing back stills on card, playback will stop
after each still playback.
Note:
• Press the A button to temporarily stop playback.
Pressing
A again will start from that point.
• If you press the A button after playback of the last
scene on disc finishes, playback will start again from the
beginning of disc.
• Pressing the B button will always restore the Disc
Navigation screen.
• With playback on Disc Navigation, you can select desired
scenes for playback and skip unnecessary scenes.
• When playing back a still with a large number of pixels on
card, “Playback.” will appear, and it will take some time
for the still to appear.
001/ 014All Progra m s
PLAY
RAM
3 0 MIN
0:00:00
REM
FINE
17:00
30/ 9/2003
001/ 014All Progra m s
PLAY
RAM
007/ 014All Progra m s
PLAY
RAM
Up or Down
Left or Right
A
Playback pause
ENG.book 83 ページ ２００３年３月２０日 木曜日 午後４時４９分