Operating instructions
95
English
QR34653
1
Copying Stills on DVD-RAM Disc to Card (Copy)
You can copy stills recorded on DVD-RAM disc to card.
1 Set the power switch to “O VIDEO” or
“N PHOTO“.
2 Press the DISC NAVIGATION button.
3 Select the still to be copied.
4 Press the MENU button.
5 Choose “Copy” on the
“Scene” menu screen,
and then press the A
button.
6 The “Copy to card”
screen will appear: If you
are sure you want to copy
the selected still, press
the A button.
If you want to change the
still to be copied, you can change it on this
screen.
7 The screen for verifying
copy will appear: Choose
“YES”, and then press the
A button.
Choose “NO” to cancel
copy.
After Yes or No setting, the “Copy to card” screen
will be restored.
Repeat steps 6 and 7 to copy other stills to card.
8 Press the B button to quit.
Note:
• No movie can be copied.
• If you press the MENU button before pressing the A
button in step 6, the submenu screen will appear (P.88).
• See “Category ” (P.116) to check the stills recorded on
DVD-RAM disc.
• You can also select multiple scenes (P.84).
• Even if all scenes, including movies, are selected to be
copied, only stills will be copied.
• Data on card cannot be copied to disc.
• The quality of still copied from disc to card will be the
same as when you recorded still on disc.
• Stills recorded on a device other than this DVD video
camera/recorder may not be copied normally.
Scene
RAM
ENTER RETURN
Delete
Edit
Copy
Sel ect
Detail
ETC
Copy to card 012/014
RAM
ENTER E X I T
ENTER
Copy PHOTO scenes
to card?
Copy
to
card
YES NO
ENG.book 95 ページ 2003年3月20日 木曜日 午後4時49分