Wireless Video Intercom System Operating Instructions Model No. VL-SW102BX VOICE CHANGER BRIGHT/ SET (HOLD 3 SEC) DOOR KEY DOOR OFF CAMERA PAGE VOLUME TALK Thank you for purchasing a Panasonic Wireless Video Intercom System. Please read these Operating Instructions before using the unit and save for future reference. VL-SW102BX_OI.
Table of Contents Important Information Important safety instructions ......................................................................................................... 4 Additional safety information ......................................................................................................... 5 LBattery ............................................................................................................................................................................
Table of Contents Intercom Talking between the main monitor station and the sub monitor station ................................. 36 LMaking an intercom call from the main monitor station ................................................................................................ 36 LMaking an intercom call from the sub monitor station .................................................................................................. 37 Programming Changing the function settings (Function list) ......
Important Information Important safety instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the appliance and in the operating instructions should be adhered to. 4) Follow all instructions. All operating and use instructions should be followed. 5) Do not use this apparatus near water.
Important Information Additional safety information 1. Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. 2. Use only the specified AC adaptor. 3. Do not tamper with the plug. 4. Make sure the plug is securely inserted. 5. Do not touch the plug with wet hands. 6. Do not place objects on the power cable. Install the unit where no one can step or trip on the cord. 7.
Important Information For best performance Before using L� It is prohibited to disassemble or modify this unit. Contact the dealer where you purchased this unit for repair. L� When power fails, this unit cannot be used. L� For the recorded image: The recorded image may be lost when: – Mishandled – Electric shock or radio wave interference occurs. – The power is turned off during use. (We might not be held responsible for the damage.
Important Information Privacy and rights of portrait When installing or using the door station or the camera (optional), please take into consideration the rights of others with regard to privacy. L� It is generally said that “Privacy” means the ability of an individual or group to stop information about themselves from becoming known to people other than those whom they choose to give the information.
Preparation Accessory information Included items For the sub monitor station 1 2 3 4 5 6 No. Item Quantity Notes 1 AC adaptor 1 Cord length: Approx. 1.8 m 2 Battery 1 ------ 3 Battery cover 1 ------ 4 Charger 1 ------ 5 Charger stand 1 ------ 6 Wood screws 2 For the charger. (3.5 mm x 18 mm) 7 Washers 2 For the charger. 7 LAccessories for installing the main monitor station and the door station are described in the Installation Guide included.
Preparation Location of controls Door station A B C D E A Camera L� When a visitor presses the call button, the camera on the door station will turn on and an image of the visitor will be shown on the monitor displays of both the main monitor station and the sub monitor station. B Microphone C Call button L� The call button is lighted with a blue LED light while the power is on. L� When a visitor presses the call button, a ringer tone will ring at the main monitor station and the sub monitor station.
Preparation Main monitor station Q VL-MW P 102 A VOIC CHANGE ER B DOOR K EY DOOR C D O BR SET (HIGHT/ OLD 3 S EC) CAME R N A PAGE M OFF VOLU M E E L K TALK F J O VIDPEUT OUT G H I Note: LFor information about the rear view, refer to page 5 on the Installation Guide. 10 VL-SW102BX_OI.
Preparation A Monitor display (page 12) B {DOOR KEY} button L� Allows you to open the door when connecting the door opener (sold separately) to the main monitor station (page 46). C Speaker D {OFF} button L� Press to end an operation. L� Press during standby to display the information display. E Talking indicator L� Lights up while you are talking. F TALK indicator L� Flashes while the door station or the sub monitor station is calling. Lights up solid during a call.
Preparation Monitor display (Main monitor station) The following displays are examples for description purposes, and they may differ from the actual display. L� The monitor display is turned off during standby. When you press {OFF}, the information display appears. A B C D DOOR1 DOOR2 P SAVE {OFF} BACK D OK ♪ Navigator key Press {◄}. Press {►}. A Indicates which device is calling, monitoring, or in a call.
Preparation Sub monitor station N Front view A Monitor display (page 16) B {DOOR KEY} button L� Allows you to open the door when the door opener (sold separately) is connected to the main monitor station (page 46). VL-W C {PAGE} button L� Press to page the main monitor station or another sub monitor station (page 23, 36). 600 A N Dark DOOR K EY B PAGE D DOOR VOLUM E C L� When you press and hold the button for about 3 seconds, the function setting display appears (page 38).
Preparation N Rear view R O Q P O Speaker P Charge contacts (Metallic parts) Q Battery cover L� Open to replace the battery. R Antenna (built-in) L� Do not cover the antenna with your hand when using the sub monitor station. (Radio waves may weaken.) 14 VL-SW102BX_OI.
Preparation Charger L� To assemble the charger stand, see page 18. A B C A Charger B Charge contacts (Metallic parts) C Charger stand N Mounting the charger on the wall 1 Mount onto the wall, directing the wood Wall mount template for the charger L� The charger stand is not required. 2.5 mm – 3 mm Wood screws (included) screws into the slots on the charger. Washer (included) 2 Slide the charger down until it is secure. Wall Approx. 50 mm Approx. 50 mm Charger 15 VL-SW102BX_OI.
Preparation Monitor display (Sub monitor station) The following display is example for description purposes, and it may differ from the actual display. L� The monitor display is turned off during standby. When you press {OFF}, the information display appears. A B C D E F VL-GM002 G H DOOR KEY I PAGE DOOR CAMERA VOLUME VOICE CHANGER Navigator key BRIGHT J K SET (HOLD SET) CHARGE OFF {OFF} TALK A Indicates the battery level. Estimated operating time after charging the battery for 7 hours.
Preparation E Indicates that the door is opened when the door opener (sold separately) is connected to the main monitor station (page 46). F Indicates the level of the reception. Note: L� Images on the monitor display: A refreshed image taken by the door station or the camera (optional) is displayed every 3 seconds. (The displayed image is not a moving picture.) Strong Use within this range.
Preparation Charging the sub monitor station 1 Insert the battery. A Align the terminals and insert. B A Terminals B Close the battery cover. 2 Assemble the charger stand. A Plug the connector of the AC adaptor into the jack on the charger. A L� You can pull out the AC adaptor cord to the left or right side. B Attach the charger stand. B 3 Plug the AC adaptor into the power outlet (100 – 240 V AC). 4 Place the sub monitor station on the charger and charge the battery.
Preparation Important: L� If the charge contacts become soiled, clean the charge contacts (page 59). L� When the sub monitor station is off the charger or the AC adaptor is disconnected for 1 week or more, remove the battery in order to maintain the battery performance and prevent the battery from discharging. – Recharge the battery before using the sub monitor station again. N To remove the charger stand Pressing the tab, pull the charger stand to detach. Tab 19 VL-SW102BX_OI.
Preparation Setting the date and time This unit has a recording function. The date and time will not be recorded when recording unless they are set. You can set the date and time using the main monitor station. {SET} ▲ ▲ { }{ } { } {▲} ▲ {OFF} {D} 1 During standby, press and hold {SET} for about 3 seconds. 2 Select “OTHER” by pressing {▼} or {▲}. 3 Press {D} then select “TIME AND DATE” by pressing {▼} or {▲}. 4 Press {D} then set the current date and time.
Doorphone Answering a call When you receive a call from a door station, the main monitor station and the sub monitor station ring and the TALK indicators flash. You can monitor the visitor on the monitor display before answering a call. {BRIGHT} {BRIGHT} {OFF} ▲ { } {▲} ▲ { } {▲} {OFF} {TALK} TALK indicator {TALK} TALK indicator 1 When a ringer tone is heard, press {TALK}. 2 Speak to the visitor. L� Speak alternately with the visitor.
Doorphone If it is difficult to hear the visitor’s voice due to noise (Press-to-talk mode) You can speak with the visitor alternately by pressing {TALK} to switch between the talking mode and the receiving mode. (You can operate this feature in the same way by using either the main monitor station or the sub monitor station.) 1 Press and hold {TALK} for about 2 seconds during a call until a beep sounds. L� “P” appears on the main monitor station, “ ” appears on the sub monitor station.
Doorphone Transferring a call You can transfer a door call between the main monitor station and the sub monitor station. L� Both of the main monitor station and the sub monitor station can transfer a door call using the same operation. L� When using multiple sub monitor stations, you can transfer a door call between the sub monitor stations.
Doorphone When receiving another call during a call or while monitoring Door station 1 Sub monitor station During a call Main monitor station VOICE CHANGER or BRIGHT/ SET (HOLD 3 SEC) DOOR DOOR KEY While monitoring CAMERA OFF PAGE VOLUME Ca ll TALK The ringer tone is heard while flashing button and display indication notify you which device is calling. L� When the door station is calling: {DOOR} flashes. L� When the camera is calling: {CAMERA} flashes.
Doorphone Monitoring the outside (Door station monitor) You can monitor the sound and image taken by the door station. (You can operate this feature in the same way by using either the main monitor station or the sub monitor station.) {DOOR} {DOOR} {BRIGHT} {BRIGHT} {OFF} {OFF} {TALK} {TALK} 1 Press {DOOR}. L� The outside image will be shown on the display, and you will hear the sound from outside. (The sound from your end will not be heard at the door station.
Camera (optional) Features of the camera Camera monitor: You can monitor the image and sound of the other room where the camera is located by using the main monitor station or the sub monitor station. The quality of the images taken by the camera is a little lower than the quality of the images taken by the door station. When the camera sensor detects temperature variations: The ringer tone sounds and the image taken by the camera is displayed on the main monitor station and the sub monitor station.
Camera (optional) Monitoring the view from the camera (Camera monitor) You can monitor the sound and camera of the place where the camera is located. (You can operate this feature in the same way by using either the main monitor station or the sub monitor station.) {BRIGHT} {BRIGHT} ▲ { } {▲} {OFF} {CAMERA} {OFF} ▲ {CAMERA} { } {▲} {TALK} {TALK} 1 Press {CAMERA}. L� The image taken by the camera will be shown on the display, and you will hear the sound from the camera.
Camera (optional) Answering a call from the camera When the sensor detects motion, the main monitor station and the sub monitor station ring and the {CAMERA} buttons flash. The image taken by the camera appears on the display. (You can operate this feature in the same way by using either the main monitor station or the sub monitor station.) {CAMERA} {BRIGHT} ▲ { } {▲} {OFF} {BRIGHT} {OFF} ▲ {CAMERA} { } {▲} {TALK} {TALK} 1 When a ringer tone is heard, press {CAMERA}.
Camera (optional) When receiving another call during a call or while monitoring Camera 1 (optional) Sub monitor station During a call Main monitor station VOICE CHANGER or BRIGHT/ SET (HOLD 3 SEC) DOOR DOOR KEY While monitoring CAMERA OFF PAGE VOLUME Ca ll TALK The ringer tone is heard while flashing button and display indication notify you which device is calling. L� When the door station is calling: {DOOR} flashes. L� When the camera is calling: {CAMERA} flashes.
Recording Recording an image The main monitor station can record (save) up to 100 images from the door station or the camera (optional) in total. When the camera is registered, you can store up to 30 images from the door station and up to 70 images from the camera separately (“PICTURE RECORD ALLOCATION” on page 41). Auto recording When you receive a call in standby mode, images are automatically recorded with the following timing.
Recording Manual recording You can record an image anytime you are receiving a call, during conversation, or monitoring. (You can operate this feature in the same way by using either the main monitor station or the sub monitor station.) {D} {D} 1 While “SAVE” is displayed on the monitor display, press {D}. (Sub monitor station) (Main monitor station) CAM1 CAMERA 1 SAVE Note: L� Recording starts a short while after pressing {D}.
Recording Viewing recorded images You can view recorded images. (You can operate this feature in the same way by using either the main monitor station or the sub monitor station.) When {D} on the main monitor station is flashing, there is an image that has not been viewed yet. If you view the image, {D} will stop flashing. ▲ ▲ { }{ } { } {▲} ▲ ▲ ▲ { }{ } { } {▲} ▲ {D} {D} {OFF} {OFF} 1 During standby, press {D} and select the desired item to view by using { ▲ } or {▲}.
Recording Recorded images taken by the door station Main monitor station NWhen “DOOR STATION PICTURE REC NUMBER” is set to “1 PICTURE” (page 41) (default setting): NWhen “DOOR STATION PICTURE REC NUMBER” is set to “4 PICTURES” (page 41): Recording device (Door station 1, 2) DOOR1 Recording number (1 – 100) ● PROTE C T Recording date and time PROTECT DOOR1 (1st image*1) (2nd image*2) (3rd image*2) (4th image*2) 32 : Unviewed image : Protected image Note: L� If you could not record 4 images, o
Recording Recorded images taken by the camera Main monitor station NWhen “NUMBER OF CAMERA PICTURES” is set to “4 PICTURES” (page 39) (default setting): NWhen “NUMBER OF CAMERA PICTURES” is set to “1 PICTURE” (page 39): Recording device (Camera 1 – 4) CAM1 1st image*1 PROTE CT (1st image*1) (2nd image*1) CAM1 PROTECT CAMERA1 PROTECT 3rd image*2 CAMERA1 (3rd image*1) (4th image*2) 4 images per set 2nd image*2 4th image*2 PROTECT CAMERA1 Recording date and time Indicates the order of images
Recording Erasing an image You can erase an unnecessary image. (You can operate this feature in the same way by using either the main monitor station or the sub monitor station.) ▲ { } ▲ { } {D} {D} {OFF} {OFF} 1 While viewing the image, press and hold {D} for 2 seconds or more. L� To view the recorded images, see page 32.
Intercom Talking between the main monitor station and the sub monitor station Intercom calls between the main monitor station and the sub monitor station can be made. (The other party’s image is not displayed.) Making an intercom call from the main monitor station {OFF} {PAGE} TALK indicator {TALK} Caller (Main monitor station) 1 During standby, press {PAGE} and talk to the other party. Receiver (Sub monitor station) 1 When the paging call is heard, press {TALK}. L� The TALK indicator lights up.
Intercom Making an intercom call from the sub monitor station {PAGE} {OFF} {TALK} TALK indicator Caller (Sub monitor station) 1 During standby, press {PAGE} and talk to the paged party. Receiver (Main monitor station or another sub monitor station) 1 When the paging call is heard, press {TALK}. L� The TALK indicator lights up. 2 When the paged party answers the call, talk with the paged party. 2 Talk with the other party. 3 To end the intercom call, press {OFF}.
Programming Changing the function settings (Function list) Changing the settings You can change and set the functions of “MAIN MONITOR STATION”, “SUB”, “CAMERA” and “OTHER”. Use the main monitor station to change the settings of ”MAIN MONITOR STATION” and “OTHER”, and use the sub monitor station to change the settings of “SUB”. Use the main monitor station or the sub monitor station to change the settings of “CAMERA”.
Programming Functions of the main monitor station The functions listed below can be set when selecting “MAIN MONITOR STATION” in step 2 on page 38. The default setting is indicated in bolds. Functions Contents VOICE ANSWER You can answer a call from the door station or the sub monitor station by answering with a clear voice such as “Yes” or “Hello” unless you press {TALK}. (This function is not work for the calls from the camera.) ON, OFF L� To answer a call by voice, see page 22.
Programming Functions of the camera (optional) The functions listed below can be set when selecting “CAMERA” (main monitor station) or “CAM” (sub monitor station) in step 2 on page 38. You can set the functions of the camera 1 – 4 separately. The default setting is indicated in bolds. [ ]: Function names when using the sub monitor station. Functions Contents CAMERA RINGER [CAM RINGER] You can select the ringer pattern that is heard from the camera when the sensor detects motion.
Programming Other functions The functions listed below can be set when selecting “OTHER” in step 2 on page 38. The default setting is indicated in bolds. Functions Contents TIME AND DATE You can set the current date and time (page 20). RINGER TONE You can select the ringer pattern that is heard from the main monitor station and the sub monitor station (page 43).
Programming Functions Contents REPEATER You can select which device is relayed by the optional repeater (up to 2 expandable units). REPEAT SUB MONITOR STATIONS, REPEAT CAMERA 1, REPEAT CAMERA 2, REPEAT CAMERA 3, REPEAT CAMERA 4 L� The devices that are not registered to the main monitor station are displayed in a light tone and you cannot select them. DELETE ALL PICTURES You can erase all recorded images. YES, NO L� The protected images are also erased.
Programming Changing the ringer tone You can change the ringer tone that is heard when receiving calls from the door station or the camera (optional). (The ringer tone of the paging call cannot be changed.) You can perform this operation using the main monitor station. LThe default settings are: Door station 1 “TONE 1”, Door station 2 “TONE 2”, Camera 1 – 4 “TONE A” 1 During standby, press and hold {SET} for about 3 seconds. 2 Select “OTHER” by pressing {▼} or {▲}.
Programming Adjusting the volume Ringer volume You can change the volume of the ringer heard when receiving calls from the door station or the camera (optional) by using the main monitor station or the sub monitor station. (3 levels and “OFF” are available.) To adjust the ringer volume of the door station: N� During standby, press {▼} or {▲}. Each time you press {▼}, the volume level decreases. Each time you press {▲}, the volume level increases.
Programming Assigning the door station or the camera to receive calls (RINGER SELECTION) When you do not want the main monitor station or sub monitor station to receive calls from a certain door station or camera (optional), set that door station or camera to “OFF”. You can perform this operation using the main monitor station. L� The default setting is “ON” for all devices. L� The specified main monitor station or sub monitor station does not receive calls from the device that is set to “OFF”.
Programming Using {DOOR KEY} button Setting {DOOR KEY} button When a separate door opener is connected to the main monitor station, you can open the door using the main monitor station or the sub monitor station. You can also select how long the door remains open. If you do not use the door opener, select “NOT CONNECT”. You can perform this operation using the main monitor station. L� The default setting is “5 SEC OPEN”. 1 During standby, press and hold {SET} for about 3 seconds.
Programming Setting the contact closure (CONTACT CLOSURE SELECTION) If a device is connected to the K1/K2 terminal of the main monitor station (For information about the K1/K2 terminal, refer to page 5 on the Installation Guide), it is also able to receive calls from the door station or the camera (optional). You can specify the door station or camera from which the device can receive calls. You can perform this operation using the main monitor station. L� The default setting is “ON” for all devices.
Expanding the System Expanding your system with optional units You can expand your system with the following optional units (� “Accessory items” on page 8). For installing or using the optional units, refer to their separate Operating Instructions. For wiring between the optional units and the main monitor station, refer to the Installation Guide included separately.
Expanding the System Units required to be installed Adding a door station: *1 Door station (limited to one additional unit) (page 8) *1 Operating the door opener: Door opener Connecting to a door opener allows you to open the door using the {DOOR KEY} on the main monitor station or the sub monitor station (page 46). Using with Panasonic PBX: Connecting to a PBX allows you to answer calls from the door station using additional machines (extensions). Please use only a Panasonic PBX (page 8).
Expanding the System Adding a sub monitor station (REGISTRATION/CANCELLATION) You can add another 3 optional sub monitor stations (page 8). Registration to the main monitor station (extension) is required. Charge the sub monitor station to be registered for about 5 minutes before registration.
Expanding the System Canceling the registration (CANCELLATION) You can cancel the registration of a sub monitor station if you do not use it. You can operate this feature in the same way by using either the main monitor station or the sub monitor station. {VOICE CHANGER} {SET} {OFF} {▼} {▲} {D} {D} {SET} {VOICE CHANGER} {▼} {▲} {OFF} 1 During standby, press and hold {SET} for about 3 seconds. 2 Press {VOICE CHANGER} 3 times then select “CANCELLATION” by pressing {▼} or {▲}.
Expanding the System Adding a camera (REGISTRATION/CANCELLATION) You can add up to 4 optional cameras (page 8). Perform the following operations to register the camera to the main monitor station, then install the camera according to the Operating Instructions included with the camera. Registering the camera to the main monitor station (REGISTRATION) Place the camera near the main monitor station and then operate the camera within 2 minutes in succession to the operations of the main monitor station.
Expanding the System Canceling the registration (CANCELLATION) You can cancel the registration of a camera if you do not use it. You can operate this feature in the same way by using either the main monitor station or the sub monitor station. {VOICE CHANGER} {D} {SET} {OFF} {▼} {▲} {D} {SET} {VOICE CHANGER} {▼} {▲} {OFF} 1 During standby, press and hold {SET} for about 3 seconds. 2 Press {VOICE CHANGER} 3 times then select “CANCELLATION” by pressing {▼} or {▲}.
Expanding the System Setting a repeater (REGISTRATION/CANCELLATION) You can set up to 2 optional repeaters (page 8). L� One repeater can relay radio waves between the main monitor station and multiple sub monitor stations. L� One repeater cannot relay radio waves between the main monitor station and multiple cameras.
Expanding the System Operations of the repeater to be registered: 7 While the power is on, press and hold {PROGRAM} for about 3 seconds. To power outlet (100 – 240 V AC) L� The STATUS indicator flashes in green. L� After completing the registration, the indicator lights up solid. 8 To end the operation, press {OFF} on the main monitor station or the sub monitor station. Important: L� If you register two repeaters, please separate them more than 3 meters to avoid electrical noise.
Help Troubleshooting Images taken by the door station or the camera (optional) Problem Cause & Solution Page The image taken by the door station is displayed in black and white. L� At night or when there is not enough lighting in the door way, the display will be shown in black and white. This is not a malfunction. ― The image is not clear or is blurry. L� The surface or the lens of the door station or the camera is dirty. Clean it with a soft dry cloth.
Help Conversation Problem Cause & Solution Sound cuts in/out or fades. L� The surroundings of the main monitor station, the sub monitor station, the door station or the camera are noisy. Try “Press-to-talk” mode. L� The antenna on the sub monitor station is being covered with your hand. Do not cover it. L� The sub monitor station or the camera is too far from the main monitor station. Move closer to the main monitor station. If you install a repeater (optional), the sound may be improved.
Help Others Problem Cause & Solution Page The main monitor station does not work. L� The display monitor does not display anything. L� The ringer tone does not sound. L� No voices can be heard. L� The plug is disconnected from the power outlet, or it is about to be disconnected. Disconnect the plug, and connect it securely again. If this is does not solve the problem, contact our service personnel. L� If you are using your own power cable, contact our service personnel. ― The display is black.
Help Cleaning Clean the unit with a soft, dry cloth when cleaning. For excessive dirt, wipe the unit with a slightly damp cloth. Important: L� When cleaning the unit, disconnect the plug or AC adaptor from the power outlet. L� Do not use anything containing alcohol, polish powder, powder soap, benzine, thinner, wax, petroleum, or boiling water. Also do not spray with insecticide, glass cleaner, or hair spray. This could cause a change in color or quality.
Help Battery replacement The battery is a consumable part. When the battery level ( ) flashes after a few calls even if the battery has been charged for about 7 hours, replace the battery with a new one. 1 Open the battery cover. 2 Remove the old battery. 3 Insert the new battery and charge it (step 1 and 4 on page 18). Important: L� Use only the rechargeable Panasonic battery HHR-P103. – Battery specifications: Rechargeable nickel metal hydride (Ni-MH) battery (3.6 V DC, 650 mAh) 60 VL-SW102BX_OI.
General Information Technical data about this product Main monitor station Power supply: Current consumption: Dimensions: Mass (Weight): Operating environment: Installation method: External material: Frequency: (VL-MW102BX) 220 – 240 V AC, 50 Hz Standby: Approx. 0.02 A During operation: Approx. 0.15 A Approx. height 188 mm x width 165 mm x depth 41.5 mm Approx.
Index Index A AC adaptor ........................................................ 18, 19 Accessory .................................................................. 8 Adjusting the volume ............................................... 44 Answering a call LAnswering a call from the door station ................ 21 LAnswering a call from the camera ....................... 28 Auto image update .................................................. 30 Auto recording .............................................
Index R Rechargeable nickel metal hydride (Ni-MH) battery (for the sub monitor station) ............................... 8, 60 Recording an image ................................................ 30 Recording date and time ................................... 33, 34 Recording number ............................................. 33, 34 Registration LSub monitor station ............................................. 50 LCamera ............................................................... 52 LRepeater ........
For your future reference Date of purchase Serial number (found in the battery compartment of the sub monitor station) Dealer’s name and address Dealer’s telephone number Attach your sales receipt here. Panasonic Communications Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: ● This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only.
