Operating Instructions

Example: when a VL-MV10 is connected using 2 VL-PS2410 power supply units
The system consists of 2 VL-PS2410 power supply units.
#4
#3
#2
#1
#8
#7
#6
#5
1
4.2.4 Mounting on a DIN rail
Attach the power supply unit to the DIN rail so that the bottom hook is positioned at the bottom of the power supply
unit.
1 Hang the top hooks (A) of the power supply unit on the top of the DIN rail.
R At this point the power supply unit will be hanging from the DIN rail but will not be secure.
2 Pull
the lever (B) down, make sure the bottom of the power supply unit is flat against the DIN rail, and then release
to lever.
R The bottom hook (C) will slide up, securing the bottom of the power supply unit to the DIN rail.
A
B
C
VL-PS240
B
C
A
VL-PS2410
4.2.5 Attaching directly to a wall
Attach the power supply unit to the wall securely using the 2 mounting screws
(A).
A
VL-PS240
VL-PS2410
A
24
4. Installation