Operating Instructions

4.3.2 Installation

1 Open a hole in the wall for the flush mount box.

R Note the dimensions of the flush mount box.

Front view

353 mm

159 mm

Side view

80 mm

2 Open the knockout holes of the flush mount box, and

then pass all necessary cables and wires

(DC plug,

LAN cable, wires for electric lock, access controller,

open door sensor) through the knockout holes.

3 Install the flush mount box in the wall.

4 Attach the

vandal proof post to the back of the lobby

station.

R See 4.3.5 Information about the vandal proof

feature (Page 20) for information about the

vandal proof feature.

A Screws

B Bracket

C Vandal proof post

4. Installation