Operating Instructions

5 Connect the wires and cables to the lobby station.

R See 4.3.3 Connecting the wires and cables

(Page 19).

6 Attach the lobby station to the flush mount box, and

then use the hex wrench to secure the lobby station

to the flush mount box using the 4 screws.

R We recommend you view the lobby station’s

camera image using a room monitor and adjust

the camera lens angle before completing the

lobby

station installation. See 4.3.4 Adjusting the

camera lens angle (Page 20).

R Do not cover the water drain holes.

A Water drain holes

4. Installation