Operating Instructions

4.3.4 Adjusting the camera lens angle

The angle of the camera lens can be adjusted ± 15°.

Pushing the lever toward the top of the lobby station

points the camera lens down; pushing it toward the

bottom points the camera lens up.

A Camera lens adjustment lever

4.3.5 Information about the vandal proof

feature

When the

vandal proof post is installed, the post presses

against the vandal proof button and holds the button

down as long at the lobby station is installed in the flush

mount box. If there is an attempt to remove the lobby

station from the flush mount box, the post releases the

button and the vandal proof feature sounds an alert for

3 minutes.

Note:

R If this alert is triggered accidentally during installation,

or to avoid false detections when performing

maintenance, disconnect the lobby station from the

power supply by disconnecting the DC plug or by

cutting the power to the power supply unit.

R To avoid false detections during installation, the

vandal proof feature cannot be triggered unless the

vandal proof button has been pressed down

continuously for 3 minutes.

4. Installation