Operating Instructions

4.6 Connecting other devices
4.6.1 Electric locks
You can connect an electric lock to each lobby station
via the K-OUT connection terminals. An electric lock is
used to open the lobby door in conjunction with another
action, such as pressing a button, swiping an access
card, inserting a key, entering a door access password,
etc.
R One electric lock can be connected to each lobby
station.
R When selecting an electric lock, select a device that
meets the following guidelines.
–
N/C or N/O dry closure contact
–
12 V AC/DC, less than 1 A
4.6.2 Access controllers
You can connect an access controller to each lobby
station via the K-IN connection terminals. An access
controller is used to determine whether the user is
allowed to open the door, such as a push button, key
switch, card reader, etc.
R One access controller can be connected to each
lobby station.
R The
lobby
station features a built-in card reader. You
can connect an external card reader to the lobby
station if necessary.
4.6.3 Open door sensors
You can connect an open door sensor to each lobby
station via the K-IN connection terminals. An open door
sensor works together with the electric lock. It allows the
lobby station to send a signal to the electric lock
continuously until the door is open.
R One open door sensor can be connected to each
lobby station.
4.6.4 SIP phones
You can connect SIP phones to the network to be used
in the facility staff office, common areas, etc.
R Up to
50 SIP phones can be registered to the system,
and up to 18 SIP phones can be registered to each
room monitor.
R Refer to the operating instructions of the SIP phone
for information about SIP server settings, setting
extension number, etc.
R Compatible Panasonic SIP phones (as of March,
2017)
– KX-HDV130/230/430 series
Consult your dealer for more information.
4.6.5 Network cameras
You can connect network cameras to the network and
register them to the system. Network cameras allow
facility staff and residents to monitor visitors and other
activity around the facility, such as a garage, common
areas, etc.
R Up to 500 network cameras can be registered to the
system, and up to 32 network cameras can be
registered to each room monitor.
R Compatible Panasonic network cameras
Consult your dealer for more information.
23
4. Installation