Operating Instructions

5.2.6 Editing a previously saved project
1 Start the setup tool.
2 In the left pane, click the desired project.
3 In the right pane, click the desired project data.
4 Click [1. Buildings and rooms configuration
]
.
5 Follow the on-screen instructions and configure the
general system information.
6 After you have configured the items on all of the
screens as needed, click [Complete] when
prompted.
5.2.7 Generating configuration files
1 Start the setup tool.
2 In the left pane, click the desired project.
3 In the right pane, click the desired project data.
4 Click [3. Configuration Data Generation
].
5.2.8 Deployment
1 Connect the computer to the same network as the
system and then start the setup tool.
2 Turn on each lobby station, room monitor, and door
station.
3 If you registered each device’s MAC address
using the setup tool
Each device will download its configuration file from
the computer and perform its own initial setup.
If you
did not register each device’s MAC address
using the setup tool
Follow the prompts displayed on the lobby station or
room monitor, and enter the device’s room number.
Each device will download its configuration file from
the computer and perform its own initial setup.
(Note that for door stations, you must register each
door station’s MAC address using the setup tool in
order for the door station to be able to complete its
initial setup.)
5.2.9 Other information
Consult your dealer or the system administrator for
information about the following.
– How to perform batch settings for configuring lobby
station and card station card readers
–
How to configure advanced settings using a web
programming
– How to configure resident information using the
phonebook tool and then sync it with the system
using web programming (includes resident names,
unlock passwords, card reader registration, etc.)
– How to allow facility staff to send text messages to
residents' room monitors (available only when a
lobby station is used as the system's SIP server)
– How
to enable or disable backlight compensation for
lobby station and door station cameras
26
5. Programming