Operating Instructions

5.3 Lobby station management
Facility staff can use a lobby station for light system
management.
1 Press M#N ® enter the administrator password ®
M#N.
R The default administrator password is "135246".
If necessary, you can change the administrator
password
(Changing the administrator password
(Page 27)).
2 Set each parameter.
R You can browse parameters by pressing M
N
and M N, and select a parameter by pressing
M#N.
R See 5.3.3 List of lobby station management
parameters (Page 29
) for information about
each parameter.
3 When finished, press M
N.
R The lobby station exits programming mode and
the standby screen is displayed.
Entering numbers and characters
You can use the keypad to enter numbers and
characters.
R Press a key repeatedly to scroll through the
characters assigned to that key.
R Follow the hints displayed on the bottom of the
display.
– To erase the rightmost character, press M N.
– To confirm or save the entered numbers or
characters, press
M#N.
Changing the administrator password
The administrator
password is required to perform lobby
station management.
1. Press M#N ® enter the administrator password ®
M#N.
R The default administrator password is "135246".
2. Select “Change Password” ® M#N.
3. Enter the desired 6-digit code ® M#N.
4. For confirmation, re-enter the desired 6-digit code
® M#N.
5.3.1 Issuing access cards
Authentication is
required in order to issue access cards.
To authenticate, you can use either the administrator’s
access card, or the password used to issue access
cards.
1 Press M#N ® enter the administrator password ®
M#N.
R The default administrator password is "135246".
2 Select “Issue Card” ® M#N.
3 Authenticate using the administrator’s access
card
Select “Main Card” ® M#N ® touch the
administrator’s card to the card reader area of the
lobby station (under the display).
R If “Card error.” is displayed, the card you
used is not the administrator’s access card.
Authenticate using the password for issuing
access cards
Select “Password” ® M#N ® enter the password for
issuing access cards ® M#N.
R The default password for issuing access cards is
"001122".
4 Enter the room number to associate with the new
card ® M#N.
5 Touch the new access card to the card reader area
of the lobby station (under the display).
R When “Issue card success!” is displayed,
the new access card has successfully been
issued.
6 Press M
N.
27
5. Programming