Operating Instructions

5.3.2 Switching between room mode and
reception mode
1 Press M#N ® enter the administrator password ®
M#N.
R The default administrator password is "135246".
2 Select
“Reception Mode” ® M#N.
3 Select “On/Off Setting” ® M#N.
4 Press M1N or M2N to display the desired setting ®
M#N.
– “Reception Mode On”: Reception mode is
enabled. Visitor calls are directed to a
receptionist.
– “Reception Mode Off”: Room mode is
enabled. Visitor calls can call rooms directly.
Note:
R If “Not registered” is displayed, no SIP phones
are registered, therefore reception mode is
unavailable.
Changing the receptionist
1. Press M#N ® enter the administrator password ®
M#N.
R The default administrator password is "135246".
2. Select
“Reception Mode” ® M#N.
3. Select “Call Centre Setting” ® M#N.
4. Select the desired setting ® M#N.
28
5. Programming