Operating Instructions

7.3 Specifications
Lobby Station (VL-VN1900)
Power source Power supply unit (VL
-PS240):
24 V DC, 0.6 A
Power
consumption
Standby: approx. 3.5 W
Operating: approx. 8.5 W
Dimensions
(mm) (height ´
width ´ depth)
Approx. 373´179´6
(excluding sections embedded
into the wall)
Mass (weight) Approx. 1,500 g
Operating
environment
Ambient temperature:
approx. -10 °C to +55 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx.
8.8 cm (3.5-inch) colour
TFT LCD
Installation
method
Flush mount (using included
flush mount box)
Image sensor 1/2.7-inch CMOS sensor
(approx. 2M pixels)
Viewing angle Horizontally: approx. 120°
Vertically: approx. 72°
Minimum
illuminance
required
1 lx (within approx. 50 cm from
the camera lens)
Lighting method LED lights
IP rating
IP55
*1
IK rating Compliant with IK07
Card reader
(RFID)
ISO/IEC 14443 Type A
(MIFARE
®
)
(Frequency: 13.56 MHz; RF
transmission power: 42
dBµA/
m (max.) @ 10 m)
Video format H.264 codec
Audio format G.711 codec
Network
interface
Ethernet II (DIX)
Network
protocol
TCP/IP, UDP
Communication
mode
Speed, Duplex AUTO
(10BASE-T/100BASE-TX,
FULL/HALF) (Auto negotiation)
*1 Water resistance is only assured if the product is
installed correctly according to the instructions, and
appropriate water protection measures are taken.
Power Supply Unit (VL-PS240)
The power supply unit is for indoor use only.
Power source Input: 220–240 V AC, 0.2 A,
50/60 Hz
Output: 24 V DC, 0.6 A
Dimensions
(mm) (height ´
width ´ depth)
Approx. 116´100´54
(excluding protruding sections)
Mass (weight) Approx. 230 g
Operating
environment
Ambient temperature: approx.
0 °C to +50 °C
Relative humidity
(non-condensing): up to 90
%
Installation
method
Attach to DIN rail
Wall mount (using included
screws)
33
7. Other information