Panasonic® VIEW Tags Safety / Setup Installation Guide Gen 3 series Please read these instructions carefully before using this product and save this manual for future use. IIOT-VIEW-SSIG-1 2019.10 | panasonic.
Preface Thank you for purchasing our product. For full use of this product safely and properly, please read this document carefully. This product has been strictly checked and tested prior to its delivery. However, please make sure that this product operates properly before using it. In case that the product becomes damaged or does not operate as specified in this document, contact the dealer you purchased from or our sales office. ◼ General terms and conditions of this document 1.
Contents Preface .........................................................................................................................................................................2 1. Specifications .......................................................................................................................................................4 1.1. Standards and Regulatory Approvals ...........................................................................................................
1. Specifications 1.1. Standards and Regulatory Approvals 1.1.1. Certifications EN 300 220-1 ETSI EN 301 489-1 ETSI EN 301 489-3 EN Standard EN 55032:2015/AC:2016 EN 55024:2010 EN 61000-4-2:2009 EN 61000-4-3:2006: +A1:2008 + A2:2010 FCC Part 15 subpart C FCC Part 15.231 FCC FCC Part 15.
1.1.2. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1.1.4. Battery Safety Warnings . CAUTION 6 These products contain lithium metal batteries. Do not charge, short circuit, incinerate or mutilate the tag, otherwise the battery may vent or rupture and release hazardous materials.
1.2. Interfaces 1.2.1. Screen The View tags incorporate electrophoretic displays to present information to the user. 1.2.1.1. View 3 Active Area (mm): Resolution (pixel): Pixel Pitch (mm): 1.2.1.2. 66.9 (H)× 29.06 (V) 296 (H)×128 (V) 0.227×0.226 View 4 Active Area (mm): Resolution (pixel): Pixel Pitch (mm): 84.8 (H)×63.6 (V) 400 (H)×300 (V) 0.212×0.212 1.2.2. Button The button serves as a means for the user to communicate with the system.
1.2.4. I/O Port Both the View 3 and View 4 feature an identical I/O port on the end of the tag. The orientation of Pin 1 on the connector is shown in Figure 1 below: Figure 1 – GPIO Connector The port supports one digital input, one digital output and a single line communication channel. The usage of each pin is described in the following table. Pin 1 2 3 4 Description GPIO OUT GPIO IN GND DATA Type OUT IN GND IN/OUT Comments 24V 0.
1.3. Physical Specifications 1.3.1. View 3 1.3.2.
1.4.
2. Installation 2.1. Brackets The View Tags are designed to be mounted using the included bracket. 2.1.1.
2.1.2.
2.2. Attachment The brackets are designed to be attached using one of two methods: 2.2.1. Tie wraps Slots at either end of the bracket will accommodate standard tie wraps to mount the bracket. This can be useful when attaching to piping or other uneven surfaces. 2.2.2. Screws For securing with screws, the following options are specified: 8-32 UNC Socket Head Cap Screw with 0.27” diameter head -orM4 x 0.7 Socket Head Cap Screw with 0.8mm dia. Head Torque: 10-12 In-Lbs. 2.2.3.
3. Licenses 3.1. CMSIS /* ---------------------------------------------------------------------* Copyright (C) 2010-2014 ARM Limited. All rights reserved. * * $Date: 19. October 2015 * $Revision: V.1.4.
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(2) University of California, Berkeley Copyright (c) 1981-2000 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
This software is the property of Advanced Micro Devices, Inc (AMD) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by AMD. AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS SOFTWARE.
Copyright (c) 2001 Christopher G. Demetriou All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
PURPOSE ARE DISCLAIMED.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
you prominently mark as "not part of the original" any modifications made to this software or documentation, and that the name of Intel Corporation not be used in advertising or publicity pertaining to distribution of the software or the documentation without specific, written prior permission. Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Toshiba Corporation, All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (34) - Jon Beniston (only lm32-* targets) Contributed by Jon Beniston Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of Xilinx nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
ARE DISCLAIMED.
are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
SUCH DAMAGE. Portions Copyright (c) 1993 by Digital Equipment Corporation. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies, and that the name of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the document or software without specific, written prior permission.
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
ARE DISCLAIMED.
(59) (c) Copyright 2017 Michael R. Neilly All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.