Operating Instructions Air-to-Water Hydromodule + Tank Model No. Indoor Unit WH-ADC0309G3E5UK Outdoor Unit WH-UD03EE5 WH-UD05EE5 WH-UD07FE5 WH-UD09FE5 English Operating Instructions Air-to-Water Hydromodule + Tank Installation Instructions attached. Serial number and production year please refer to name plate. Manufactured by: Panasonic Appliances Air-Conditioning Malaysia Sdn. Bhd. Lot 2, Persiaran Tengku Ampuan, Section 21, Shah Alam Industrial Site, 40300 Shah Alam, Selangor Darul Ehsan, Malaysia.
Before use, make sure the system has been installed correctly by an authorised dealer according to the given instructions. Thank you for purchasing Panasonic product. Before operating the system, read these operating instructions thoroughly and keep them for future reference. Table of contents • Panasonic Air-to-Water is a split system, consisting of two units: indoor and outdoor units. The indoor unit consist of the hydromodule and 200L sanitary water tank.
Safety precautions This sign warns of CAUTION injury or damage to property. The instructions to be followed are classified by the following symbols: This symbol denotes an action that is PROHIBITED. These symbols denote actions COMPULSORY.
Safety precautions Do not install the unit in a potentially explosive or flammable atmosphere. Failure to do so could result in fire. Do not insert your fingers or other objects into the indoor or outdoor unit; the rotating parts may cause injury. Do not touch the outdoor unit during lightning, it may cause an electric shock. Do not sit or step on the unit, you may fall down accidentally. Do not install the indoor unit outdoors. This is designed for indoor installation only.
Indoor unit and outdoor unit Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion on the unit. Do not install the unit close to any combustibles or at bathroom. Otherwise, it may cause electric shock and/or fire. Do not touch the water discharge pipe of the indoor unit during operation. Do not place any material on the unit or under it. Do not touch the sharp aluminium fin; sharp parts may cause injury.
To adjust initial settings Dealer Select menus and determine settings according to the system available in the household. It is recommended that all alterations of settings are done by an authorised dealer or specialist. Operation LED • After initial installation, you may manually adjust the settings. The initial setting remains active until the user changes it. • Ensure the operation LED is OFF before setting. • The system may not work properly if set wrongly. Please consult an authorised dealer.
Dealer User Operation/settings to be done only by the authorised dealer/specialist. Operation/settings to be done by the authorised dealer/specialist or user. 6 Backup Heater For Tank YES YES NO To activate backup heater during tank operation. • Do not use the system during sterilisation in order to prevent scalding with hot water, or overheating of shower. • Ask an authorised dealer to determine the level of sterilisation function field settings according to the local laws and regulations.
How to use User The system is turned off by an external switch. Turn on or off the system Press . When the system is ON, the operation LED is lit and the actual water outlet temperature and outdoor ambient temperature are shown on the display. User Select operation mode Press to select operation mode. AUTO • Depending on the preset outdoor temperature, the system selects HEAT or *1 COOL operation mode.
Dealer User Operation/settings to be done only by the authorised dealer/specialist. Operation/settings to be done by the authorised dealer/specialist or user. Dealer Display Temperature setting System temperature setting The system controls the temperature for each menu based on the outdoor ambient temperature. • To set or change the temperatures, make sure to contact your nearest authorised dealer. 1 Press and hold for 5 seconds to enter the temperature range setting mode. (The display shows SETTING.
How to use User Desired temperature setting Shifting the water temperature This easily shifts the water outlet temperature if the setting is undesirable. 1 Press to enter the water temperature shifting mode. 2 Press to change setting. 3 Press or to set the desired temperature. (temperature range: -5 °C ~ 5 °C) Temperature setting +5 Shift value -5 4 Press to confirm the setting.
Dealer User Operation/settings to be done only by the authorised dealer/specialist. Operation/settings to be done by the authorised dealer/specialist or user. User Weekly timer setting Promotes energy saving by allowing you to set up to 6 programmes in any given day. Lights up if Timer operation is selected Indicates the next timer operation programme Programme number in a day Indicates the next timer operation day Day to be selected ON Timer OFF Timer 3 Press to enter the timer setting mode.
Cleaning instructions To ensure optimal performance of the system, cleaning has to be carried out at regular intervals. Consult an authorised dealer. • Disconnect the power supply before cleaning. • Do not use benzine, thinner or scouring powder. • Use only soap ( pH7) or neutral household detergent. • Do not use water hotter than 40 °C. Indoor unit Outdoor unit • Do not splash water directly. Wipe the unit gently with a soft dry cloth. • Do not obstruct the air inlet and outlet vents.
Troubleshooting The following symptoms do not indicate malfunction. Symptom Cause System is hard to heat up. System does not heat up instantly. • Condensation or evaporation occurring in the pipes. • It is caused by defrost operation in the heat exchanger. • It is caused by the protection control of the system when outdoor temperature is out of the operating range. • It is caused by the protection control of the system.
Troubleshooting The operation LED blinks and error code appears on the display. • Disconnect the power supply, and report the error code to an authorised dealer. • The timer operation will be cancelled when an error code is displayed.
Information Information for Users on Collection and Disposal of Old Equipment These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
Country UK/England UK/Ireland Telephone Number +44 (0) 134 485 3393 +353 (0) 872 696 043 Panasonic Corporation Website: http://www.panasonic.
