Operating Instructions
15
English
Information for Users on Collection and Disposal of Old Equipment
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points,
in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from inappropriate waste
handling.
For more information about collection and recycling of old products, please contact your local municipality,
your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Information
Dry Concrete Function
• During construction to dry the concrete under a preset temperature.
1
Press
and simultaneously and hold for 5 seconds until the display shows “ ”.
2
Press .
(The display shows “ ”).
3
Press
to select day.
Press
or to set the desired temperature.
4
Press to confirm the selection.
5
Repeat step
3
and
4
to set other days and temperature.
• Press
to exit.
Operation/settings to be done only by the authorised dealer/specialist.
To Reset the Control Panel to Default
Setting
1
Press
, , continuously for 5 seconds. The
operation is off during this period.
2
The display shows “ , , ” for 2
seconds for confirmation. After 2 seconds, it goes to
normal display.
Troubleshooting / Information
F569865-SS0419-2.indb 15F569865-SS0419-2.indb 15 2/5/2019 11:27:04 AM2/5/2019 11:27:04 AM