User Manual

50
51
Register camera preset positions
Register the current camera position as a preset position. The preset positions can be registered only when
using a camera supporting the preset position function.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
→ The "Camera control [Advanced]" panel will be
displayed. (☞ Page 46)
Step 3
Perform the pan/tilt operation to move the camera to
the position to be registered. (☞ Page 47)
Step 4
Click the [D]/[C] button in the [Position] box to select
a preset number. Select a preset number (1 - 256) to
be registered.
Note:
 • OnsomePanasoniccameramodels,presetposi-
tion number 0 is registered as home position.
Refer to the "readme.txt" on the provided
CD-ROM about supported cameras.
Step 5
Click the [Regist] button.
→ The camera direction will be registered to the
selected preset position number.
Move camera preset positions
Move the camera to the registered preset position. It is necessary to register preset positions in advance.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Detail] button.
→ The "Camera control [Advanced]" panel will be
displayed. (☞ Page 46)
Step 3
Click the [D]/[C] button in the [Position] box to select
a preset number. Select a preset number (0 - 256) to
be registered. Selecting preset position number 0 will
move the camera to home position.
Step 4
Click the [Call] button.
→ The camera direction will move to the preset posi-
tion corresponding to the selected preset position
number.
Note:
 • Anon-registeredpresetnumbercanbeselected,
but the camera will not move even if the [Call] but-
ton is clicked.