Specification Sheet

16CH Real-Time MPEG-4 Digital Disk Recorder supporting 480 ips (NTSC) / 400 ips (PAL)
Key Features
Optional Accessory
4CH Camera Control Board
WV-PB4164
Standard Accessories
• Equipped with 8 Dual Core Encoders, all 16 cameras can be
recorded at 30 ips (NTSC) / 25 ips (PAL) per channel.
MPEG-4: High quality and high compression technology for economical recording.
Supports multiplexed video and control data over the coax (4ch default, additional
4ch by optional board WV-PB4164) and RS-485 camera control (channel 1 ~ 16).
Panasonic camera control: Pan/Tilt, Zoom, Focus, Iris, Preset Position, Auto mode (depends
on the camera model) with a system controller, the monitoring software or the web browser*.
• Various recording modes: Manual, Timer, Event (Pre/Post)
Flexible recording/playback controls: REC, PLAY, Pause, Stop, FF, REW, Prev Record, Next Record
• Various display modes: 4 / 6 / 9 / 16 split screen display (Live)
• Sixteen alarm inputs and four alarm outputs.
• Synchronized audio recording for 16 channels.
Direct Search and List Search (Time & Date, Event Type, Camera number).
• Alarm notification via e-mail.
• Three user levels: Manager, Operator and Viewer
Camera partitioning setting can be applied to each user level.
Built-in Video Motion Detector: Mask area: 24 x 20, Sensitivity: 01 ~ 99
Recorded image data can be copied to CD-R, DVD-R, DVD+R, USB memory (FAT32),
USB HDD (FAT32) via COPY interface (Specified model only) or DVD-R, CD-R via
internal DVD drive (WJ-RT416V), Viewer software can be included when copying.
• A maximum of 3 TB (6x 500 GB, WJ-RT416) or 2.5 TB (5x 500 GB,
WJ-RT416V) hard disk drives can be installed.
• HDD Safety Mode to protect HDDs during installation.
Optional WV-CU650 or WV-CU950 system controllers can be connected (RS-485). Playback
speed can be controlled by Jog/Shuttle. Direct camera preset position program is also available.
Integration capability with System150*
2
or System650*
3
: System controllers connected
to System150/650 can control WJ-RT416. Cameras connected to System150/650 can
be controlled from the monitoring software (RT4client) or the web browser*.
Built-in network interfaces (10Base-T / 100Base-TX) for remote monitoring and operation.
• Multi-recorder, Multi-site system can be made with the provided
monitoring software (RT4client).
• Recorded video and audio data can be downloaded to the client PC
with the monitoring software or the web browser*.
Up to 16 network clients can monitor live spot images (total network video stream is 16,
Refresh rate depends on the number of streams, recording mode and playback mode).
• Up to four playback streams can be sent to the network.
• Selectable Unicast/Multicast for efficient network utilization.
• The viewer software can convert recorded audio and video data into
Windows Media-format, and also can extract audio to wav file.
* Available from version 1.4, *2 System150 version 2.2 or later. *3 System650 version 3.0 or later.
16CH Real-Time MPEG-4 Digital Disk Recorder
WJ-RT416 Series
WJ-RT416 (120 V AC)
<With 1x 250GB HDD>
WJ-RT416K (120 V AC)
<Without HDD>
WJ-RT416V (120 V AC)
<With DVD drive, 1x 250GB HDD>
WJ-RT416VK (120 V AC)
<With DVD drive, without HDD>
WJ-RT416 (220 ~ 240 V AC)
<With 1x 250GB HDD>
WJ-RT416K (220 ~ 240 V AC)
<Without HDD>
WJ-RT416V (220 ~ 240 V AC)
<With DVD drive, 1x 250GB HDD>
WJ-RT416VK (220 ~ 240 V AC)
<With DVD drive, without HDD>
• CD-ROM* ...................................... 1 pc.
• Installation Guide .......................... 1 pc.
* The followings are included on the CD-ROM.
Operating instructions of the monitoring software (PDF)
Monitoring software (RT4client, including the viewer software)
The followings are for installation.
• Power cable (for NTSC model) ..... 1 pc.
• Power cable (for PAL model) ..... 2 pcs.
HDD mounting screws, sleeves, dampers
• Rack mounting brackets ............. 2 pcs.
Fixing screw for rack mounting brackets
... 8 pcs.
Version 1.3
Part Names and Functions
Front View
Rear View
Error Indicator
Alarm Indicator
Timer Indicator
Operate Indicator
HDD Access Indicators
Sequence Button
Multi-screen Button
Alarm Reset Button
Camera Selection Buttons
Setup Button
Search Button
Copy Button
Arrow Button
Escape Button
Set Button
Stop Button
Play/Pause Button
Record/Record Stop Button
Fast Reverse Playback Button
Fast Forward Playback Button
Skip Buttons
Copy 2 Port
Internal CD/DVD drive
(Only for the WJ-RT416V)
Audio Output Connector
AUX Input Connector
Monitor 1 Connector
Serial Terminal
Monitor 2 Terminal
RS-485 Port
Data Port
Mode Switch
Network Port
Copy 1 Port
Audio Input/
Alarm Output Terminal
Alarm Input/
Control Terminal
Audio Input Connectors
Signal Ground Terminal
Power Button
Cooling Fan
Power Cord Inlet
Video Input Connectors/
Video Output Connectors
COPY2
Inside the cover

Summary of content (2 pages)