WJ-HD316 Network Setup manual

16
Status display area
q The status of a live/playback image will be
displayed.
[LIVE]:
Indicates that a live image is being displayed.
[SEQ]:
Indicates that a live image is being displayed in
the sequential display mode.
[Playback]:
Indicates that a playback image is being dis-
played.
[Reverse playback]:
Indicates that a reverse playback image is being
displayed.
[Fast playback]:
Indicates that a fast playback image is being dis-
played.
[Fast reverse playback]:
Indicates that a fast reverse playback image is
being displayed.
[Pause]:
Indicates that a paused image is being dis-
played.
[HDD]:
Indicates that playback of a recorded image
stored in the normal recording area or the event
recording area of the built-in hard disk of this unit
is being displayed.
[COPY1]:
Indicates that playback of a recorded image
stored in the external recording device connect-
ed to the COPY 1 connector of this unit is being
displayed.
[COPY2]:
Indicates that playback of a recorded image
stored in the external recording device connect-
ed to the COPY 2 connector of this unit is being
displayed.
[FILTERING]:
Indicates that the recording event list/thumbnail
is filtered.
Refer to the provided operating instructions for
further information about filtering of recording
event list.
– [STEP1] – [STEP7]:
Indicates the playback speed.
STEP1: Normal playback speed
STEP2: Approx. 4x playback speed
STEP3: Approx. 8x playback speed
STEP4: Approx. 16x playback speed
STEP5: Approx. 32x playback speed
STEP6: Approx. 48x playback speed
STEP7: Approx. 96x playback speed
w REC indicator
The status of recording will be displayed.
When lit red:
Indicates that recording is being performed.
When not lit:
Indicates that recording is not being performed.
e Indicates the following statuses:
[BUSY]:
Indicates that the camera is not operable
because a user with higher priority is currently
operating that camera.
[COPY]:
Indicates that copying is being performed.
[DELETE]:
Indicates that deletion of a recorded image is
being performed.
r Indicates information about events and errors.
[ALARM RESET]:
Indicates an event occurrence.
The alarm display action will be canceled by
clicking this button. (Refer to the Network
Operating Instructions (pdf).)
[ERROR]:
Indicates an error occurrence.
Refer to the provided operating instructions for
further information about error action.
w e r
q